Add release v1.4.3

Return an error when weave isn't running, on RequestPool

CHANGELOG.md

@@ -1,3 +1,28 @@
+## Release 1.4.3
+
+Preparing for Docker 1.10, plus some bug-fixes.
+
+* Avoid hang in Docker v1.10 on `docker volume ls` after `weave stop`,
+  `weave stop-plugin` or `weave reset` #1934/#1936
+* Fix "unexpected EOF" from Docker 1.10 on `docker exec` with Weave
+  proxy `--rewrite-inspect` enabled #1911/#1917
+* Avoid losing DNS entries and potentially double-allocating IP
+  Addresses allocated via plugin, on router restart; also extend
+  `weave ps` to show IP addresses allocated via plugin #1745/#1921
+* Stop creating lots of copies of `weavewait` program in Docker
+  volumes #1757/#1935
+* Prevent container starting prematurely when proxy in
+`--no-multicast-route` mode #1942/#1943
+* Log error message from plugin rather than crashing when weave not
+  running #1906/#1918
+* Warn, don't error, if unable to remove plugin network in 'weave
+  stop', to avoid breaking the usual upgrade or config change process
+  #1900/#1919
+* Don't crash if network conditions suggest only very small packets
+  will get through #1905/#1926
+* Cope with unexpected errors during route traversal when starting
+  container via proxy #1909/#1910/#1932
+
 ## Release 1.4.2
 
 Bug-fixes and minor improvements.

Makefile

@@ -119,7 +119,7 @@ $(WEAVEEXEC_UPTODATE): prog/weaveexec/Dockerfile prog/weaveexec/symlink $(DOCKER
 	$(SUDO) DOCKER_HOST=$(DOCKER_HOST) docker build -t $(WEAVEEXEC_IMAGE) prog/weaveexec
 	touch $@
 
-$(DOCKERPLUGIN_UPTODATE): prog/plugin/Dockerfile $(DOCKERPLUGIN_EXE)
+$(DOCKERPLUGIN_UPTODATE): prog/plugin/Dockerfile $(DOCKERPLUGIN_EXE) $(WEAVEEXEC_UPTODATE)
 	$(SUDO) docker build -t $(DOCKERPLUGIN_IMAGE) prog/plugin
 	touch $@
 

net/if.go

@@ -52,16 +52,25 @@ func EnsureInterfaceAndMcastRoute(ifaceName string) (*net.Interface, error) {
 		return nil, err
 	}
 	dest := net.IPv4(224, 0, 0, 0)
-	// check for currently-existing route after subscribing, to avoid race
+	check := func(route netlink.Route) bool {
-	if CheckRouteExists(ifaceName, dest) {
+		return route.LinkIndex == iface.Index && route.Dst != nil && route.Dst.IP.Equal(dest)
-		return iface, err
 	}
-	for update := range ch {
+	// check for currently-existing route after subscribing, to avoid race
-		link, _ := netlink.LinkByIndex(update.Route.LinkIndex)
+	routes, err := netlink.RouteList(nil, netlink.FAMILY_V4)
-		if link.Attrs().Name == ifaceName && update.Route.Dst.IP.Equal(dest) {
+	if err != nil {
-			break
+		return nil, err
+	}
+	for _, route := range routes {
+		if check(route) {
+			return iface, nil
 		}
 	}
+	for update := range ch {
+		if check(update.Route) {
+			return iface, nil
+		}
+	}
+	// should never get here
 	return iface, nil
 }
 

net/route.go

@@ -10,7 +10,7 @@ import (
 // A network is considered free if it does not overlap any existing
 // routes on this host. This is the same approach taken by Docker.
 func CheckNetworkFree(subnet *net.IPNet, ignoreIfaceNames map[string]struct{}) error {
-	return forEachRoute(ignoreIfaceNames, func(name string, route netlink.Route) error {
+	return forEachRoute(ignoreIfaceNames, func(route netlink.Route) error {
 		if route.Dst != nil && overlaps(route.Dst, subnet) {
 			return fmt.Errorf("Network %s overlaps with existing route %s on host.", subnet, route.Dst)
 		}
@@ -26,7 +26,7 @@ func overlaps(n1, n2 *net.IPNet) bool {
 // For a specific address, we only care if it is actually *inside* an
 // existing route, because weave-local traffic never hits IP routing.
 func CheckAddressOverlap(addr net.IP, ignoreIfaceNames map[string]struct{}) error {
-	return forEachRoute(ignoreIfaceNames, func(name string, route netlink.Route) error {
+	return forEachRoute(ignoreIfaceNames, func(route netlink.Route) error {
 		if route.Dst != nil && route.Dst.Contains(addr) {
 			return fmt.Errorf("Address %s overlaps with existing route %s on host.", addr, route.Dst)
 		}
@@ -34,32 +34,24 @@ func CheckAddressOverlap(addr net.IP, ignoreIfaceNames map[string]struct{}) erro
 	})
 }
 
-func forEachRoute(ignoreIfaceNames map[string]struct{}, check func(name string, r netlink.Route) error) error {
+func forEachRoute(ignoreIfaceNames map[string]struct{}, check func(r netlink.Route) error) error {
+	ignoreIfaceIndices := make(map[int]struct{})
+	for ifaceName := range ignoreIfaceNames {
+		if iface, err := net.InterfaceByName(ifaceName); err == nil {
+			ignoreIfaceIndices[iface.Index] = struct{}{}
+		}
+	}
 	routes, err := netlink.RouteList(nil, netlink.FAMILY_V4)
 	if err != nil {
 		return err
 	}
 	for _, route := range routes {
-		link, err := netlink.LinkByIndex(route.LinkIndex)
+		if _, found := ignoreIfaceIndices[route.LinkIndex]; found {
-		if err == nil {
+			continue
-			if _, found := ignoreIfaceNames[link.Attrs().Name]; found {
-				continue
-			}
 		}
-		if err := check(link.Attrs().Name, route); err != nil {
+		if err := check(route); err != nil {
 			return err
 		}
 	}
 	return nil
 }
-
-func CheckRouteExists(ifaceName string, dest net.IP) bool {
-	found := false
-	forEachRoute(map[string]struct{}{}, func(name string, route netlink.Route) error {
-		if name == ifaceName && route.Dst.IP.Equal(dest) {
-			found = true
-		}
-		return nil
-	})
-	return found
-}

plugin/ipam/driver.go

@@ -1,10 +1,12 @@
 package ipamplugin
 
 import (
+	"fmt"
 	"net"
 
 	"github.com/docker/libnetwork/ipamapi"
 	"github.com/docker/libnetwork/netlabel"
+	godocker "github.com/fsouza/go-dockerclient"
 	"github.com/weaveworks/weave/api"
 	. "github.com/weaveworks/weave/common"
 	"github.com/weaveworks/weave/common/docker"
@@ -20,7 +22,13 @@ type ipam struct {
 }
 
 func NewIpam(client *docker.Client, version string) (ipamapi.Ipam, error) {
-	resolver := func() (string, error) { return client.GetContainerIP(WeaveContainer) }
+	resolver := func() (string, error) {
+		addr, err := client.GetContainerIP(WeaveContainer)
+		if _, ok := err.(*godocker.NoSuchContainer); ok {
+			return "", fmt.Errorf("%s container is not present. Have you launched it?", WeaveContainer)
+		}
+		return addr, err
+	}
 	return &ipam{client: client, weave: api.NewClientWithResolver(resolver)}, nil
 }
 
@@ -33,6 +41,9 @@ func (i *ipam) RequestPool(addressSpace, pool, subPool string, options map[strin
 	Log.Debugln("RequestPool", addressSpace, pool, subPool, options)
 	cidr, err := i.weave.DefaultSubnet()
 	Log.Debugln("RequestPool returning ", cidr, err)
+	if err != nil {
+		return "", nil, nil, err
+	}
 	// Pass back a fake "gateway address"; we don't actually use it,
 	// so just give the network address.
 	data := map[string]string{netlabel.Gateway: cidr.String()}

plugin/skel/listener.go

@@ -265,6 +265,7 @@ func sendError(w http.ResponseWriter, msg string, code int) {
 }
 
 func errorResponse(w http.ResponseWriter, fmtString string, item ...interface{}) {
+	w.WriteHeader(http.StatusInternalServerError)
 	json.NewEncoder(w).Encode(map[string]string{
 		"Err": fmt.Sprintf(fmtString, item...),
 	})

prog/plugin/main.go

@@ -69,25 +69,35 @@ func main() {
 	Log.Println("Weave plugin", version, "Command line options:", os.Args[1:])
 	Log.Info(dockerClient.Info())
 
-	var globalListener, meshListener net.Listener
+	err = run(dockerClient, address, meshAddress, meshNetworkName, nameserver, noMulticastRoute)
+	if err != nil {
+		Log.Fatal(err)
+	}
+}
+
+func run(dockerClient *docker.Client, address, meshAddress, meshNetworkName, nameserver string, noMulticastRoute bool) error {
 	endChan := make(chan error, 1)
 	if address != "" {
 		globalListener, err := listenAndServe(dockerClient, address, nameserver, noMulticastRoute, endChan, "global", false)
 		if err != nil {
-			Log.Fatalf("unable to create driver: %s", err)
+			return err
 		}
+		defer os.Remove(address)
 		defer globalListener.Close()
 	}
 	if meshAddress != "" {
 		meshListener, err := listenAndServe(dockerClient, meshAddress, nameserver, noMulticastRoute, endChan, "local", true)
 		if err != nil {
-			Log.Fatalf("unable to create driver: %s", err)
+			return err
 		}
+		defer os.Remove(meshAddress)
 		defer meshListener.Close()
 	}
 
 	if meshNetworkName != "" {
-		createNetwork(dockerClient, meshNetworkName, meshAddress)
+		if err := createNetwork(dockerClient, meshNetworkName, meshAddress); err != nil {
+			return err
+		}
 	}
 
 	sigChan := make(chan os.Signal, 1)
@@ -96,16 +106,12 @@ func main() {
 	select {
 	case sig := <-sigChan:
 		Log.Debugf("Caught signal %s; shutting down", sig)
-		if err := dockerClient.Client.RemoveNetwork(meshNetworkName); err != nil {
+		if meshNetworkName != "" {
-			Log.Fatal(err)
+			return dockerClient.Client.RemoveNetwork(meshNetworkName)
 		}
+		return nil
 	case err := <-endChan:
-		if err != nil {
+		return err
-			Log.Errorf("Error from listener: %s", err)
-			globalListener.Close()
-			meshListener.Close()
-			os.Exit(1)
-		}
 	}
 }
 
@@ -141,7 +147,7 @@ func listenAndServe(dockerClient *docker.Client, address, nameserver string, noM
 	return listener, nil
 }
 
-func createNetwork(dockerClient *docker.Client, networkName, address string) {
+func createNetwork(dockerClient *docker.Client, networkName, address string) error {
 	if _, err := dockerClient.Client.NetworkInfo(networkName); err == nil {
 		Log.Printf("Docker network '%s' already exists", networkName)
 	} else if _, ok := err.(*go_docker.NoSuchNetwork); ok {
@@ -157,7 +163,8 @@ func createNetwork(dockerClient *docker.Client, networkName, address string) {
 		}
 		_, err := dockerClient.Client.CreateNetwork(options)
 		if err != nil {
-			Log.Fatalf("Error creating network: %s", err)
+			return fmt.Errorf("Error creating network: %s", err)
 		}
 	}
+	return nil
 }

prog/weaveexec/Dockerfile

@@ -4,9 +4,6 @@ MAINTAINER Weaveworks Inc <help@weave.works>
 LABEL works.weave.role=system
 
 WORKDIR /home/weave
-VOLUME /w
-VOLUME /w-noop
-VOLUME /w-nomcast
 ENTRYPOINT ["/home/weave/sigproxy", "/home/weave/weave"]
 
 RUN apk add --update \

proxy/inspect_exec_interceptor.go

@@ -22,6 +22,10 @@ func (i *inspectExecInterceptor) InterceptResponse(r *http.Response) error {
 		return err
 	}
 
+	if _, ok := exec["Container"]; !ok {
+		return nil
+	}
+
 	container, err := exec.Object("Container")
 	if err != nil {
 		return err

router/sleeve.go

@@ -917,7 +917,7 @@ func (fwd *sleeveForwarder) processSendError(err error) error {
 			return nil
 		}
 
-		fwd.mtuHighestGood = 8
+		fwd.mtuHighestGood = 552
 		fwd.mtuLowestBad = mtu + 1
 		fwd.mtuCandidate = mtu
 		fwd.mtuTestsSent = 0

site/_includes/header-navbaronly.html

@@ -2,7 +2,7 @@
     <div class="navbar navbar-inverse">
       <div class="container">
         <div class="navbar-header">
-          <a class="navbar-brand" href="http://weave.works/"><img src="http://weave.works/img/weave-logo.png"></a>
+          <a class="navbar-brand" href="http://weave.works/"><img src="http://www.weave.works/wp-content/uploads/2015/11/weave-logo-nav.png" class=" img-responsive" align="left"></a>
         </div>
         <div class="nav-wrapper">
           <ul class="nav navbar-nav navbar-right">

site/plugin.md

@@ -5,36 +5,33 @@ layout: default
 
 # Weave Plugin
 
-New in Docker version 1.9 is a plugin mechanism to add different
+Docker versions 1.9 and later have a plugin mechanism for adding
-network providers.
+different network providers. Weave installs itself as a network plugin
+when you start it with `weave launch`. To create a network that spans
+multiple docker hosts, the weave peers must be connected in the usual
+way, i.e. by specifying other hosts in `weave launch` or
+[`weave connect`](features.html#dynamic-topologies).
 
-To install, download the `weave` script as per the [readme][].
+Subsequently you can start containers with, e.g.
-
-The Weave Net plugin runs automatically when you `weave launch`.  You
-must still tell the weave peers to connect to one another, either via
-`weave launch` or `weave connect`.
-
-## Starting a container
 
     $ docker run --net=weave -ti ubuntu
 
-## Using WeaveDNS for Service Discovery
+on any of the hosts, and they can all communicate with each other.
 
-You need to pass the additional arguments `--dns` and `-dns-search`,
+In order to use Weave's [Service Discovery](weavedns.html), you
-for which we provide a helper in the weave script:
+need to pass the additional arguments `--dns` and `-dns-search`, for
+which we provide a helper in the weave script:
 
     $ docker run --net=weave -h foo.weave.local $(weave dns-args) -tdi ubuntu
     $ docker run --net=weave -h bar.weave.local $(weave dns-args) -ti ubuntu
     # ping foo
 
-For more details see the [Weave Service Discovery documentation][service-discovery].
-
 ## Under the hood
 
-The Weave Net plugin actually provides *two* network drivers to Docker
+The Weave plugin actually provides *two* network drivers to Docker
-- one named `weavemesh` that can operate without a [cluster
+- one named `weavemesh` that can operate without a cluster store and
-store](#cluster-store) (like Docker's overlay driver) and one named
+one named `weave` that can only work with one (like Docker's overlay
-`weave` that can only work with one.
+driver).
 
 ### `weavemesh` driver
 
@@ -54,7 +51,8 @@ networks.
 * Used with Docker's cluster store based IPAM
 
 There's no specific documentation from Docker on using a cluster
-store, but the first part of [Getting Started with Docker Multi-host Networking][docker-net]
+store, but the first part of
+[Getting Started with Docker Multi-host Networking](https://github.com/docker/docker/blob/master/docs/userguide/networking/get-started-overlay.md)
 should point the way.
 
 Note that in the case of multiple networks using the `weave` driver, all containers are
@@ -87,9 +85,14 @@ route, add the `--no-multicast-route` flag to `weave launch-plugin`.
 We start the plugin with a policy of `--restart=always`, so that it is
 there after a restart or reboot. If you remove this container
 (e.g. using `weave reset`) before removing all endpoints created using
-`--net=weave`, Docker can
+`--net=weave`, Docker may hang for a long time when it subsequently
-[hang](https://github.com/docker/libnetwork/issues/813).
+tries to talk to the plugin.
 
-[readme]: https://github.com/weaveworks/weave/blob/master/README.md#installation
+Unfortunately, [Docker 1.9 may also try to talk to the plugin before it has even started it](https://github.com/docker/libnetwork/issues/813).
-[service-discovery]: weavedns.html
+If using `systemd`, we advise that you modify the Docker unit to
-[docker-net]: https://github.com/docker/docker/blob/master/docs/userguide/networking/get-started-overlay.md
+remove the timeout on startup, to give Docker enough time to abandon
+its attempts.
+
+E.g. in the file `/lib/systemd/system/docker.service`, add under `[Service]`:
+
+    TimeoutStartSec=0

test/105_frag_2_test.sh

@@ -8,7 +8,8 @@ C2=10.2.1.71
 # 700 = Linux's minimum PMTU (552) + weave framing overheads
 # (currently about 60, but we leave some margin). That way the PMTUs
 # seen by containers is still >= 552.
-drop_large_udp_packets="FORWARD -p udp --destination-port 6783 -m length '!' --length 0:700 -j DROP"
+drop_large_sleeve_packets="INPUT -p udp --destination-port 6783 -m length '!' --length 0:700 -j DROP"
+drop_large_fastdp_packets="INPUT -p udp --destination-port 6784 -m length '!' --length 0:700 -j DROP"
 
 start_suite "PMTU discovery and packet fragmentation"
 
@@ -18,7 +19,8 @@ weave_on $HOST2 launch
 start_container $HOST1 $C1/24 --name=c1
 start_container $HOST2 $C2/24 --name=c2
 
-run_on $HOST2 "sudo iptables -I $drop_large_udp_packets"
+run_on $HOST1 "sudo iptables -I $drop_large_sleeve_packets"
+run_on $HOST1 "sudo iptables -I $drop_large_fastdp_packets"
 assert_raises "weave_on $HOST2 connect $HOST1"
 sleep 35 # give weave time to discover the PMTU
 
@@ -28,6 +30,7 @@ sleep 35 # give weave time to discover the PMTU
 exec_on $HOST2 c2 $PING -s 10000 $C1 1>/dev/null 2>&1 || true
 assert_raises "exec_on $HOST2 c2 $PING -s 10000 $C1"
 
-run_on $HOST2 "sudo iptables -D $drop_large_udp_packets"
+run_on $HOST1 "sudo iptables -D $drop_large_fastdp_packets"
+run_on $HOST1 "sudo iptables -D $drop_large_sleeve_packets"
 
 end_suite

test/610_proxy_wait_for_weave_test.sh

@@ -6,15 +6,26 @@ entrypoint() {
   docker_on $HOST1 inspect --format="{{.Config.Entrypoint}}" "$@"
 }
 
+check_iface_ready() {
+    assert_raises "proxy docker_on $HOST1 run -e 'WEAVE_CIDR=$1' $BASE_IMAGE $CHECK_ETHWE_UP"
+    assert_raises "proxy docker_on $HOST1 run -e 'WEAVE_CIDR=$1' $BASE_IMAGE ip -4 -o addr show ethwe | grep -q '$1'"
+}
+
 start_suite "Proxy waits for weave to be ready before running container commands"
-weave_on $HOST1 launch-proxy
+
 BASE_IMAGE=busybox
 # Ensure the base image does not exist, so that it will be pulled
 ! docker_on $HOST1 inspect --format=" " $BASE_IMAGE >/dev/null 2>&1 || docker_on $HOST1 rmi $BASE_IMAGE
 
-assert_raises "proxy docker_on $HOST1 run --name c1 -e 'WEAVE_CIDR=10.2.1.1/24' $BASE_IMAGE $CHECK_ETHWE_UP"
+# check that interface is ready, with and without --no-multicast-route
+weave_on $HOST1 launch-proxy --no-multicast-route
+check_iface_ready 10.2.1.1/24
+weave_on $HOST1 stop-proxy
+weave_on $HOST1 launch-proxy
+check_iface_ready 10.2.1.1/24
 
 # Check committed containers only have one weavewait prepended
+proxy_start_container $HOST1 --name c1 -e 'WEAVE_CIDR=10.2.1.1/24'
 COMMITTED_IMAGE=$(proxy docker_on $HOST1 commit c1)
 assert_raises "proxy docker_on $HOST1 run --name c2 $COMMITTED_IMAGE"
 assert "entrypoint c2" "$(entrypoint $COMMITTED_IMAGE)"

test/810_plugin_router_restart.sh

@@ -0,0 +1,24 @@
+#! /bin/bash
+
+. ./config.sh
+
+C1_NAME=c1.weave.local
+
+start_suite "Recovery of container details on router restart (via 'local' plugin)"
+
+weave_on $HOST1 launch
+start_container_local_plugin $HOST1 --name=c1 --hostname=$C1_NAME
+c1ip=$(container_ip $HOST1 c1)
+
+weave_on $HOST1 stop-router
+weave_on $HOST1 launch-router
+
+assert "container_ip $HOST1 c1" "$c1ip"
+assert "weave_on $HOST1 dns-lookup $C1_NAME" "$c1ip"
+
+# check that c1 IP has been reclaimed and doesn't get assigned to a
+# fresh container
+start_container $HOST1 --name=c2
+assert_raises "container_ip $HOST1 c2 | grep -v $c1ip"
+
+end_suite

test/config.sh

@@ -176,7 +176,7 @@ proxy_start_container_with_dns() {
 rm_containers() {
     host=$1
     shift
-    [ $# -eq 0 ] || docker_on $host rm -f "$@" >/dev/null
+    [ $# -eq 0 ] || docker_on $host rm -f -v "$@" >/dev/null
 }
 
 container_ip() {

weave

@@ -344,6 +344,7 @@ IMAGE=$BASE_IMAGE:$IMAGE_VERSION
 BASE_PLUGIN_IMAGE=$DOCKERHUB_USER/plugin
 PLUGIN_IMAGE=$BASE_PLUGIN_IMAGE:$IMAGE_VERSION
 PLUGIN_CONTAINER_NAME=weaveplugin
+VOLUMES_CONTAINER_NAME=weavevolumes-$IMAGE_VERSION
 
 PROCFS=${PROCFS:-/proc}
 DOCKER_BRIDGE=${DOCKER_BRIDGE:-docker0}
@@ -762,11 +763,11 @@ connect_container_to_bridge() {
     # veth pair in the 'up' or 'down' state.  Furthermore, moving one
     # end into a netns normally sets them to 'down'.  But, moving an
     # end into the default netns is a null operation, so they stay up,
-    # which leads to errors later on.  So to get a consistent result,
+    # which leads to errors in 'set name' since that requires the
-    # we have to be explicit in setting them 'up' or 'down' as
+    # interface to be down. So to get a consistent result, we set the
-    # necessary.
+    # interface 'down' to begin with.
     if ! netnsenter ip link set $GUEST_IFNAME down ||
-       ! netnsenter ip link set $GUEST_IFNAME name $1 up ||
+       ! netnsenter ip link set $GUEST_IFNAME name $1 ||
        ! ip link set $LOCAL_IFNAME up ||
        ! add_iface_$BRIDGE_TYPE $LOCAL_IFNAME ||
        ! configure_arp_cache $1 "netnsenter" ; then
@@ -833,8 +834,12 @@ setup_router_iface_bridged_fastdp() {
     setup_router_iface_fastdp "$@"
 }
 
+container_in_host_ns() {
+    [ -h "$PROCFS/$CONTAINER_PID/ns/net" -a -h "/proc/self/ns/net" -a "$(readlink $PROCFS/$CONTAINER_PID/ns/net)" = "$(readlink /proc/self/ns/net)" ]
+}
+
 attach() {
-    if [ -h "$PROCFS/$CONTAINER_PID/ns/net" -a -h "/proc/self/ns/net" -a "$(readlink $PROCFS/$CONTAINER_PID/ns/net)" = "$(readlink /proc/self/ns/net)" ] ; then
+    if container_in_host_ns ; then
         echo "Container is running in the host network namespace, and therefore cannot be" >&2
         echo "connected to weave. Perhaps the container was started with --net=host." >&2
         return 1
@@ -895,8 +900,8 @@ detach() {
     netnsenter ip link del $CONTAINER_IFNAME type veth
 }
 
-container_weave_addrs() {
+container_ip_addr_show() {
-    netnsenter ip addr show dev $CONTAINER_IFNAME
+    ! container_in_host_ns && netnsenter ip addr show
 }
 
 ######################################################################
@@ -1027,6 +1032,17 @@ wait_for_status() {
     done
 }
 
+# Parse the output of `ip addr show`, outputing weave addresses of kind $1
+addrs_from_ip_addr_show() {
+    while read first second rest ; do
+        if [ "$first" != "${first%:}" ] ; then
+            iname="${second%:}"
+        elif [ "$first" = "$1" -a \( "$iname" = "weave" -o "$iname" != "${iname#ethwe}" \) ] ; then
+            echo $second
+        fi
+    done
+}
+
 # Call $1 for all containers, passing container ID, all MACs and all IPs
 with_container_addresses() {
     COMMAND=$1
@@ -1035,12 +1051,14 @@ with_container_addresses() {
         if [ "$CONTAINER_ID" = "weave:expose" ] ; then
             ADDRS_CMD="ip addr show dev $BRIDGE"
         else
-            ADDRS_CMD="with_container_netns $CONTAINER_ID container_weave_addrs"
+            ADDRS_CMD="with_container_netns $CONTAINER_ID container_ip_addr_show"
         fi
         if CONTAINER_ADDRS=$($ADDRS_CMD 2>/dev/null) ; then
-            CONTAINER_MAC=$(echo "$CONTAINER_ADDRS" | grep -o 'link/ether .*' | cut -d ' ' -f 2)
+            CONTAINER_MAC=$(echo "$CONTAINER_ADDRS" | addrs_from_ip_addr_show 'link/ether')
-            CONTAINER_IPS=$(echo "$CONTAINER_ADDRS" | grep -o 'inet .*'       | cut -d ' ' -f 2)
+            CONTAINER_IPS=$(echo "$CONTAINER_ADDRS" | addrs_from_ip_addr_show 'inet')
-            $COMMAND "$CONTAINER_ID" "$CONTAINER_MAC" "$CONTAINER_IPS"
+            if [ -n "$CONTAINER_MAC$CONTAINER_IPS" ] ; then
+                $COMMAND "$CONTAINER_ID" "$CONTAINER_MAC" "$CONTAINER_IPS"
+            fi
         fi
     done
 }
@@ -1278,7 +1296,7 @@ collect_dns_add_remove_args() {
 # with_container_addresses.
 ipam_reclaim() {
     for CIDR in $3 ; do
-        # NB: CONTAINER_IP is the IP of the weave container; it is set by wait_for_status.
+        # NB: CONTAINER_IP is the IP of the weave container.
         http_call $CONTAINER_IP:$HTTP_PORT PUT /ip/$1/${CIDR%/*}?noErrorOnUnknown=true
     done
 }
@@ -1476,7 +1494,7 @@ proxy_args() {
 }
 
 proxy_addrs() {
-    if addr="$(http_call_unix $PROXY_CONTAINER_NAME status.sock GET /status 2>&1)" ; then
+    if addr="$(http_call_unix $PROXY_CONTAINER_NAME status.sock GET /status 2>/dev/null)" ; then
       echo "$addr" | sed "s/0.0.0.0/$PROXY_HOST/g"
 
     else
@@ -1650,7 +1668,7 @@ attach_router() {
     if [ -z "$NO_DNS_OPT" ] ; then
         # Tell the newly-started weaveDNS about existing weave IPs
         for CONTAINER in $(docker ps -q --no-trunc) ; do
-            if CONTAINER_IPS=$(with_container_netns $CONTAINER container_weave_addrs 2>&1 | sed -n -e 's/inet \([^/]*\)\/\(.*\)/\1/p') ; then
+            if CONTAINER_IPS=$(with_container_netns $CONTAINER container_ip_addr_show 2>/dev/null | addrs_from_ip_addr_show 'inet') && [ -n "$CONTAINER_IPS" ] ; then
                 with_container_fqdn $CONTAINER put_dns_fqdn $CONTAINER_IPS
             fi
         done
@@ -1669,8 +1687,14 @@ launch_proxy() {
     docker_client_args $DOCKER_CLIENT_ARGS
     proxy_args "$@"
     mkdir -p /var/run/weave
+    # Create a data-only container to mount the weavewait files from
+    if ! docker inspect -f ' ' $VOLUMES_CONTAINER_NAME > /dev/null 2>&1 ; then
+       docker create -v /w -v /w-noop -v /w-nomcast --name=$VOLUMES_CONTAINER_NAME \
+           --label=weavevolumes --entrypoint=/bin/false $EXEC_IMAGE >/dev/null
+    fi
     PROXY_CONTAINER=$(docker run --privileged -d --name=$PROXY_CONTAINER_NAME --net=host \
         $PROXY_VOLUMES \
+        --volumes-from $VOLUMES_CONTAINER_NAME \
         $(docker_sock_options) \
         -v /var/run/weave:/var/run/weave \
         -v /proc:/hostproc \
@@ -1715,8 +1739,12 @@ remove_plugin_network() {
         $PLUGIN_IMAGE --remove-network
 }
 
+warn_plugin_active() {
+    echo "WARNING: docker may hang in this state; re-launch weave and remove attached containers before shutting down" >&2
+}
+
 stop_plugin() {
-    remove_plugin_network
+    remove_plugin_network || warn_plugin_active
     stop $PLUGIN_CONTAINER_NAME "Plugin"
 }
 
@@ -2152,14 +2180,15 @@ EOF
         ;;
     reset)
         [ $# -eq 0 ] || usage
-        plugin_disabled || remove_plugin_network || \
+        plugin_disabled || remove_plugin_network || warn_plugin_active
-            echo "WARNING: docker may hang in this state; re-launch weave and remove attached containers before shutting down" >&2
         warn_if_stopping_proxy_in_env
         call_weave DELETE /peer >/dev/null 2>&1 || true
         for NAME in $PLUGIN_CONTAINER_NAME $CONTAINER_NAME $PROXY_CONTAINER_NAME ; do
             docker stop  $NAME >/dev/null 2>&1 || true
             docker rm -f $NAME >/dev/null 2>&1 || true
         done
+        VOLUME_CONTAINERS=$(docker ps -qa --filter label=weavevolumes)
+        [ -n "$VOLUME_CONTAINERS" ] && docker rm -v $VOLUME_CONTAINERS  >/dev/null 2>&1 || true
         conntrack -D -p udp --dport $PORT >/dev/null 2>&1 || true
         destroy_bridge
         for LOCAL_IFNAME in $(ip link show | grep v${CONTAINER_IFNAME}pl | cut -d ' ' -f 2 | tr -d ':') ; do