2.4 KiB
title, layout
| title | layout |
|---|---|
| How Weave Net Works | default |
A Weave network consists of a number of 'peers' - Weave Net routers residing on different hosts. Each peer has a name, which tends to remain the same over restarts, a human friendly nickname for use in status and logging output and a unique identifier (UID) that is different each time it is run. These are opaque identifiers as far as the router is concerned, although the name defaults to a MAC address.
Weave Net routers establish TCP connections with each other, over which they perform a protocol handshake and subsequently exchange topology information. These connections are encrypted if so configured. Peers also establish UDP "connections", possibly encrypted, which carry encapsulated network packets. These "connections" are duplex and can traverse firewalls.
Weave Net creates a network bridge on the host. Each container is connected to that bridge via a veth pair, the container side of which is given an IP address and netmask supplied either by the user or by Weave Net's IP address allocator. Also connected to the bridge is the Weave Net router container.
A Weave Net router captures Ethernet packets from its bridge-connected interface in promiscuous mode, using 'pcap'. This typically excludes traffic between local containers, and between the host and local containers, all of which is routed straight over the bridge by the kernel. Captured packets are forwarded over UDP to weave router peers running on other hosts. On receipt of such a packet, a router injects the packet on its bridge interface using 'pcap' and/or forwards the packet to peers.
Weave Net routers learn which peer host a particular MAC address resides on. They combine this knowledge with topology information in order to make routing decisions and thus avoid forwarding every packet to every peer. Weave Net can route packets in partially connected networks with changing topology. For example, in this network, peer 1 is connected directly to 2 and 3, but if 1 needs to send a packet to 4 or 5 it must first send it to peer 3:
See Also
