weave/weaver/weave

#!/bin/sh
set -e

usage() {
    echo "Usage:"
    echo "weave launch <ipaddr>/<subnet> [-passwd <passwd>] <peer_host> ..."
    echo "weave run    <ipaddr>/<subnet> <docker run args> ..."
    echo "weave expose <ipaddr>/<subnet>"
    echo "weave hide   <ipaddr>/<subnet>"
    echo "weave stop"
    exit 1
}

[ `id -u` = 0 ] || {
    echo "weave must be run as 'root'"
    exit 1
}

[ $# -gt 0 ] || usage

BRIDGE=weave
CONTAINER_IFNAME=ethwe
MTU=65535

COMMAND=$1

shift 1

create_bridge() {
    [ ! -d /sys/class/net/$BRIDGE ] && {
        ip link add dev $BRIDGE type bridge
        ip link set dev $BRIDGE address 7a:$(od -txC -An -N5 /dev/random | tr \  : | tail -c+2)
        # Attempting to set the bridge MTU to a high value directly
        # fails. Bridges take the lowest MTU of their interfaces. So
        # instead we create a temporary interface with the desired
        # MTU, attach that to the bridge, and then remove it again.
        ip link add name v${CONTAINER_IFNAME}du mtu $MTU type dummy
        ip link set dev v${CONTAINER_IFNAME}du master $BRIDGE
        ip link del dev v${CONTAINER_IFNAME}du
    }
    ip link set dev $BRIDGE up
}

add_nat_rule() {
    if ! iptables -w -t nat -C $1 >/dev/null 2>&1
    then
        iptables -w -t nat -A $1 >/dev/null
    fi
}

setup_masquerading() {
    add_nat_rule "POSTROUTING -o $BRIDGE ! -s $IPADDR -j MASQUERADE"
    add_nat_rule "POSTROUTING -s $IPADDR ! -o $BRIDGE -j MASQUERADE"
}

case "$COMMAND" in
    launch)
        [ $# -gt 0 ] || usage
        IPADDR=$1
        shift 1
        create_bridge
        setup_masquerading
        # We set the router name to the bridge mac since that is
        # stable across re-creations of the containers.
        #
        # TODO use the mac of one of the physical host interfaces
        # (eth0, wlan0, etc) so the name becomes stable across host
        # restarts.
        MACADDR=`cat /sys/class/net/$BRIDGE/address`
        CONTAINER=$(docker run --privileged -d --name=weave -p 6783:6783/tcp -p 6783:6783/udp $WEAVE_DOCKER_ARGS zettio/weave -name $MACADDR "$@")
        echo $CONTAINER
        IFACE=eth0
        ;;
    run)
        [ $# -gt 0 ] || usage
        IPADDR=$1
        shift 1
        create_bridge
        CONTAINER=$(docker run -d "$@")
        echo $CONTAINER
        IFACE=$CONTAINER_IFNAME
        ;;
    expose)
        [ $# -gt 0 ] || usage
        IPADDR=$1
        shift 1
        if ! ip addr list dev $BRIDGE | grep -qF $IPADDR
        then
            ip addr add dev $BRIDGE $IPADDR
        fi
        exit 0
        ;;
    hide)
        [ $# -gt 0 ] || usage
        IPADDR=$1
        shift 1
        if ip addr list dev $BRIDGE | grep -qF $IPADDR
        then
            ip addr del dev $BRIDGE $IPADDR
        fi
        exit 0
        ;;
    stop)
        docker kill weave > /dev/null
        docker rm weave > /dev/null
        if command -v conntrack >/dev/null 2>&1
        then
            conntrack -D -p udp --dport 6783 >/dev/null 2>&1
        else
            echo "Cannot find conntrack; please install it. Continuing without it." >&2
        fi
        exit 0
        ;;
    *)
        echo "Unknown weave command '$COMMAND'"
        usage
        ;;
esac

# the following borrows from https://github.com/jpetazzo/pipework

DOCKERPID=$(docker inspect --format='{{ .State.Pid }}' $CONTAINER)
[ "$DOCKERPID" = 0 ] && {
    echo "Docker inspect returned invalid PID 0"
    exit 1
}
[ "$DOCKERPID" = "<no value>" ] && {
    echo "Container $CONTAINER unknown to Docker."
    exit 1
}

NSPID=$DOCKERPID

[ ! -d /var/run/netns ] && mkdir -p /var/run/netns
[ -f /var/run/netns/$NSPID ] && rm -f /var/run/netns/$NSPID
ln -s /proc/$NSPID/ns/net /var/run/netns/$NSPID

LOCAL_IFNAME="v${CONTAINER_IFNAME}pl${NSPID}"
GUEST_IFNAME="v${CONTAINER_IFNAME}pg${NSPID}"
ip link add name $LOCAL_IFNAME mtu $MTU type veth peer name $GUEST_IFNAME mtu $MTU
ip link set $LOCAL_IFNAME master $BRIDGE
ip link set $LOCAL_IFNAME up
ip link set $GUEST_IFNAME netns $NSPID
ip netns exec $NSPID ip link set $GUEST_IFNAME name $CONTAINER_IFNAME
ip netns exec $NSPID ip addr add $IPADDR dev $CONTAINER_IFNAME
ip netns exec $NSPID ip link set $CONTAINER_IFNAME up

if command -v ethtool >/dev/null 2>&1
then
    ip netns exec $NSPID ethtool -K $IFACE tx off > /dev/null
else
    echo "Cannot find ethtool; please install it. Continuing without it." >&2
fi

[ -f /var/run/netns/$NSPID ] && rm -f /var/run/netns/$NSPID