Smoke test for peer names

test/390_peer_name_test.sh

@@ -0,0 +1,69 @@
+#! /bin/bash
+
+. "$(dirname "$0")/config.sh"
+
+# rot8 the hex digits so if you do this twice you get back the original
+rot8() {
+    tr '[0-9a-f]' '[8-9a-f0-7]'
+}
+
+get_peername() {
+    weave_on $HOST1 report -f '{{.Router.Name}}'
+}
+
+remove_bridge() {
+    run_on $HOST1 sudo ip link del weave
+    run_on $HOST1 sudo ip link del vethwe-datapath
+    docker_on $HOST1 run --rm --privileged --net=host --entrypoint=/usr/bin/weaveutil weaveworks/weaveexec delete-datapath datapath
+}
+
+start_suite "peer name derivation"
+
+# Save the original machine ID
+ORIG_MACHINE_ID=$($SSH $HOST1 cat /etc/machine-id)
+[ -n "$ORIG_MACHINE_ID" ] || echo "Machine ID is blank!" >&2
+
+# Blank machine-id to begin, so peername will work the same as pre-1.9
+$SSH $HOST1 sudo cp /dev/null /etc/machine-id
+
+weave_on $HOST1 launch-router
+weave_on $HOST1 prime
+PEERNAME1=$(get_peername)
+
+# Now put the machine ID back
+echo $ORIG_MACHINE_ID | $SSH $HOST1 sudo tee /etc/machine-id >/dev/null
+
+# Stop and restart; it should take the ID from the bridge
+weave_on $HOST1 stop-router
+weave_on $HOST1 launch-router
+
+assert "get_peername" "$PEERNAME1"
+
+# Stop and remove the bridge, then restart; it should take the ID from persistence
+weave_on $HOST1 stop-router
+remove_bridge
+weave_on $HOST1 launch-router
+
+assert "get_peername" "$PEERNAME1"
+
+# Now remove everything and restart: should get a different peer name
+weave_on $HOST1 reset
+weave_on $HOST1 launch-router
+
+PEERNAME3=$(get_peername)
+assert_raises "[ $PEERNAME3 != $PEERNAME1 ]"
+
+# Change the machine ID
+echo $ORIG_MACHINE_ID | rot8 | $SSH $HOST1 sudo tee /etc/machine-id >/dev/null
+
+# Remove bridge and restart; it should get a different ID
+weave_on $HOST1 stop-router
+remove_bridge
+weave_on $HOST1 launch-router
+
+assert_raises "[ $(get_peername) != $PEERNAME3 ]"
+
+# Put the original machine ID back
+echo $ORIG_MACHINE_ID | $SSH $HOST1 sudo tee /etc/machine-id >/dev/null
+
+end_suite