Bryan Boreham
ea50b3d5cc
Create a different weavevolumes container for each Weave version.
...
They will be named 'weavevolumes-v1.4.3', 'weavevolumes-latest', etc.
Use a label to identify these containers so they can all be removed on `weave reset`.
2016-01-29 12:22:22 +00:00
Bryan Boreham
598efe5d1a
Reduce docker volumes for weavewait to just one set.
...
- Create an auxilliary container 'weavevolumes' to hold the '/w/w'
files, and map into that instead of creating new volumes every time.
- Show "/bin/false" as its command in `docker ps` instead of
"/home/weave/sigproxy".
- Remove volumes when cleaning up smoketest containers.
2016-01-28 15:57:22 +00:00
Matthias Radestock
3679065258
cope with nil route.Dst
...
Fixes #1932 .
2016-01-27 22:02:07 +00:00
Matthias Radestock
4649f1158a
Merge pull request #1926 from weaveworks/issues/1905-fix-negative-fragment
...
Negative fragment fix
Fixes #1905 .
2016-01-26 16:56:03 +00:00
Adam Harrison
de17a44f35
Fix fragmentation test
...
The assumptions on which this test was based were violated by the
introduction of fast datapath. A new rule is required to block fast
datapath traffic, to ensure that sleeve is selected for forwarding; the
rules must also be moved from the FORWARD chain to INPUT as the router
now runs in the host netns (NB we use INPUT instead of OUTPUT as the
latter results in sleeve receiving an 'operation not permitted' udpv4
write error when it tries to send a packet that is too big, rather than
the packet just being silently dropped as required)
2016-01-25 10:58:31 +00:00
Adam Harrison
52ce4df18e
Increase the lowest possible good PMTU
...
The current minimum PMTU we can detect is eight bytes, which, being
lower than the minimum IPv4 MTU of 68 bytes, can cause an exception in
the sleeve packet fragmentation implementation. We increase that minimum
to 552, the lowest PMTU value that Linux will cache.
2016-01-25 10:53:10 +00:00
Matthias Radestock
f1ed5bf838
Merge branch 'latest_release_doc_updates' into 1.4
2016-01-22 13:35:27 +00:00
Matthias Radestock
256a801d16
typo
2016-01-22 13:34:59 +00:00
Matthias Radestock
c416cf8da5
tidying of plugin docs
2016-01-22 13:27:22 +00:00
Matthias Radestock
75e812a061
Merge branch 'latest_release_doc_updates' into 1.4
2016-01-21 12:30:14 +00:00
Matthias Radestock
4cc7b01940
Merge pull request #1907 from weaveworks/systemd-timeout
...
Suggest disabling systemd timeout if using Weave Net plugin
2016-01-21 12:29:42 +00:00
Matthias Radestock
a2ff7e5981
Merge pull request #1919 from weaveworks/issues/1900-dont-stop-stoppin
...
Warn, don't error, if unable to remove network in 'weave stop'
Fixes #1900 .
2016-01-21 11:22:21 +00:00
Bryan Boreham
cda98a6375
Merge pull request #1917 from weaveworks/issues/1911-fix-unexpected-eof
...
Fix unexpected EOF with Docker 1.10-rc1 and proxy --rewrite-inspect
2016-01-21 10:15:20 +00:00
Matthias Radestock
3b7a754b0a
Merge branch 'latest_release_doc_updates' into 1.4
2016-01-20 18:56:26 +00:00
Anita Buehrle
c01c6bcb91
fixed logo image in header
2016-01-20 12:48:31 -06:00
Bryan Boreham
e47360f8dc
Warn, don't error, if unable to remove network in 'weave stop'
2016-01-20 16:18:09 +00:00
Adam Harrison
14944da396
Ignore stderr in proxy_addrs
2016-01-20 14:24:59 +00:00
Adam Harrison
a3974c2aeb
Abort inspect exec rewrite unless Containers node is present
2016-01-20 14:24:28 +00:00
Bryan Boreham
13ec517f94
Merge pull request #1910 from weaveworks/1909-forEachRoute-panic
...
cope with errors during route traversal
2016-01-20 14:05:10 +00:00
Matthias Radestock
43419815f4
bypass netlink.LinkByIndex
...
since we are seeing some cases where it returns "Link not found" when
the link is in fact there.
2016-01-19 16:36:16 +00:00
Matthias Radestock
b5256f7b71
refactor: inline
...
This eliminates the unnecessary indirection via interface names,
instead identifying the interface by its index.
2016-01-19 16:36:16 +00:00
Matthias Radestock
0caa9dd652
cope with errors during route traversal
...
Fixes #1909 .
2016-01-19 15:28:31 +00:00
Bryan Boreham
5e1e8ec543
Suggest user disables systemd timeout if using plugin
2016-01-18 11:45:17 +00:00
Adam Harrison
c391092ea6
Add release v1.4.2
2016-01-14 11:40:17 +00:00
Adam Harrison
b3a29bec1b
Merge pull request #1886 from weaveworks/issues/1869-leave-plugin
...
Allow plugin to keep running on 'weave launch'
2016-01-13 11:08:54 +00:00
Bryan Boreham
b055c9a4a2
Fool-proofing
2016-01-13 10:33:49 +00:00
Bryan Boreham
3daceac668
Allow pre-existing plugin on 'weave launch-plugin'
2016-01-13 10:05:02 +00:00
Matthias Radestock
4611e8825a
Merge branch 'latest_release_doc_updates' into 1.4
2016-01-13 09:25:34 +00:00
Matthias Radestock
00e4729533
Merge pull request #1872 from weaveworks/issues/1871-address-docs
...
Documentation on IP addresses, routes and networks
2016-01-13 09:24:31 +00:00
Bryan Boreham
517a2e0e0a
Fix nonzero exit code for a pre-existing plugin on launch;
...
do this purely for the 'plugin running' case, not 'restarting' etc.
2016-01-12 17:06:38 +00:00
Bryan Boreham
bb8c7c599c
Revert "don't launch anything when plugin is running"
...
This reverts commit 3ade796e8d
2016-01-12 16:51:49 +00:00
Bryan Boreham
0d0fc39236
More review feedback
2016-01-12 15:35:34 +00:00
Adam Harrison
302a5a4efc
Merge pull request #1884 from weaveworks/issues/1882-check-after-subscribe
...
Fix race condition in weavewait
2016-01-12 14:28:03 +00:00
Bryan Boreham
3b29e8e6f2
Check for existing interfaces and routes after subscribing to receive new ones
2016-01-12 12:27:55 +00:00
Bryan Boreham
a1dff70ba2
Review feedback
2016-01-11 11:55:11 +00:00
Matthias Radestock
12671be260
Merge branch 'latest_release_doc_updates' into 1.4
2016-01-11 11:49:22 +00:00
Bryan Boreham
9a4adccec6
Remove inconsistent information about restart policy
2016-01-11 11:20:40 +00:00
Bryan Boreham
f90390974a
Add page explaining IP addresses, networks and routes
2016-01-11 10:30:37 +00:00
Matthias Radestock
f598ae297b
Merge branch 'latest_release_doc_updates' into 1.4
2016-01-08 18:14:23 +00:00
Bryan Boreham
4b0fe502f0
Document the --no-multicast-route flag
2016-01-08 17:12:20 +00:00
Matthias Radestock
e4295a2da9
don't attach rewrite_etc_hosts helper container to weave
...
...since that is a) inefficent and b) can block when IPAM hasn't had
consensus.
We can only end up in this situation when DOCKER_HOST is pointing at
the weave proxy and we are running `weave run|attach` with
`--local`. So it's very much an edge case.
Fixes #1858 .
2016-01-07 14:32:52 +00:00
Matthias Radestock
216a0fe4fc
refactor: WEAVE_CIDR=none is redundant when --net=host
2016-01-07 14:29:51 +00:00
Matthias Radestock
80770d39e5
oops
2016-01-04 10:53:41 +00:00
Matthias Radestock
beb15fa32c
don't fail weave launch when plugin is disabled
...
Fixes #1851 .
2016-01-04 10:35:44 +00:00
Matthias Radestock
0adf7626d0
Merge branch 'latest_release_doc_updates' into 1.4
2016-01-04 09:45:56 +00:00
Matthias Radestock
9c17fe259c
add ToC to build instructions
2016-01-04 09:41:39 +00:00
Matthias Radestock
ecab4b4716
correct image names
2016-01-04 09:35:17 +00:00
Matthias Radestock
7660ad761a
oops
...
I broke this in 370212609Fixes #1848 .
2016-01-03 16:42:39 +00:00
Matthias Radestock
c8ff2de3b3
properly deal with unavailable docker server api version
...
Fixes #1845 .
2015-12-31 12:51:16 +00:00
Matthias Radestock
24a2e43547
Merge pull request #1841 from weaveworks/1840-weave-stop-plugin-complaint
...
don't complain in `weave stop` when plugin is not enabled
Fixes #1840 .
2015-12-31 12:32:05 +00:00
Bryan Boreham