Add release v2.2

Make proxy use configured WeaveDNS address

CHANGELOG.md

@@ -1,3 +1,47 @@
+## Release 2.2.0
+
+This release improves the way Weave Net configures Linux network
+devices and network filter rules, so that it is more robust in the face
+of unexpected changes in its environment. #3204,#3224
+
+As a consequence of these changes, the `weave attach` command will now
+fail unless the Weave Net daemon is up and running - previously it was
+possible to run independently as long as you managed all IP addresses
+yourself.
+
+## Other improvements
+
+* Update library miekg/dns for CVE-2017-15133 (details under embargo) #3223,#3227
+* Reduce the volume of logging from weave-npc #3183
+* Add ability to set log level for Docker "v2" plugin, and change
+  default log level from DEBUG to INFO #3197
+* Downgrade log messages about Discovery and Expiration to DEBUG level #3202,#3203
+* Use command-line parameter for WeaveDNS address in Docker proxy #3196
+
+## Bug fixes
+
+* Ensure that rules to block traffic for NetworkPolicy are placed
+  ahead of rules that Kubernetes has added to allow other traffic #3209,#3210
+
+## Build and test
+
+* Update CI tests to use Kubernetes 1.9.2 #3229
+* Remove "daily update" from test VMs that only run for a few minutes #3224
+
+## External Contributors
+
+Thanks to the following contributors:
+@vetal4444
+
+[Full list of changes](https://github.com/weaveworks/weave/milestone/67?closed=1)
+
+
+## Release 2.1.3
+
+This release fixes a race-condition in the IP reclaim code for weave-kube
+where two nodes could end up fighting over the same space and break
+connectivity #3190, #3192
+
 ## Release 2.1.2
 
 This release fixes a couple of bugs discovered since the release of Weave Net 2.1.0

DEPENDENCIES

@@ -1,3 +1,3 @@
 DOCKER_VERSION=17.06
-KUBERNETES_VERSION=1.7.8
+KUBERNETES_VERSION=1.9.2
-KUBERNETES_CNI_VERSION=0.5.1
+KUBERNETES_CNI_VERSION=0.6.0

bin/release

@@ -196,7 +196,7 @@ publish() {
 
     if [ "$RELEASE_TYPE" = 'PRERELEASE' ] ; then
         echo "== Building and pushing plugin"
-        make UPDATE_LATEST=$IS_MAINLINE SUDO=$SUDO WEAVE_VERSION=$VERSION DOCKERHUB_USER=$DOCKERHUB_USER plugin_publish
+        make UPDATE_LATEST=false SUDO=$SUDO WEAVE_VERSION=$VERSION DOCKERHUB_USER=$DOCKERHUB_USER plugin_publish
         echo "** Plugin built and pushed"
 
         echo "== Tagging and pushing images on docker hub as user $DOCKERHUB_USER"
@@ -232,7 +232,7 @@ publish() {
         echo '** Sanity checks OK for publishing tag' $LATEST_TAG as $DOCKERHUB_USER/weave:$VERSION
 
         echo "== Building and pushing plugin"
-        make UPDATE_LATEST=$IS_MAINLINE SUDO=$SUDO WEAVE_VERSION=$VERSION DOCKERHUB_USER=$DOCKERHUB_USER plugin_publish
+        make UPDATE_LATEST=true SUDO=$SUDO WEAVE_VERSION=$VERSION DOCKERHUB_USER=$DOCKERHUB_USER plugin_publish
         echo "** Plugin built and pushed"
 
         echo "== Tagging and pushing images on docker hub as user $DOCKERHUB_USER"

common/odp/odp.go

@@ -75,6 +75,14 @@ func DeleteDatapath(dpname string) error {
 }
 
 func AddDatapathInterface(dpname string, ifname string) error {
+	return addDatapathInterface(dpname, ifname, false)
+}
+
+func AddDatapathInterfaceIfNotExist(dpname string, ifname string) error {
+	return addDatapathInterface(dpname, ifname, true)
+}
+
+func addDatapathInterface(dpname, ifname string, ignoreIfExist bool) error {
 	dpif, err := odp.NewDpif()
 	if err != nil {
 		return err
@@ -87,5 +95,9 @@ func AddDatapathInterface(dpname string, ifname string) error {
 	}
 
 	_, err = dp.CreateVport(odp.NewNetdevVportSpec(ifname))
+	if ignoreIfExist && err == odp.NetlinkError(syscall.EEXIST) {
+		return nil
+	}
+
 	return err
 }

docs/release-process.md

@@ -133,8 +133,8 @@ Finally, for **Mainline** releases only:
 * Close the [milestone](https://github.com/weaveworks/weave/milestones) in GitHub and create the next milestone
 * Update the `#weavenetwork` topic heading on freenode (requires 'chanops' permission)
 * For a mainline release vX.Y.0, create a release branch X.Y from the
-  tag and push to GitHub - this will result in X.Y.0 site docs being
+  tag, push to GitHub and set [WEAVE_NET_REV](https://github.com/weaveworks/website-next/blob/master/Makefile)
-  published to https://www.weave.works
+  to X.Y via a PR - this will result in X.Y.0 site docs being published to https://www.weave.works
 * Add the new version of `weave-net` to the checkpoint system at
   https://checkpoint-api.weave.works/admin
 * File a PR to update the version of the daemonset at

net/bridge.go

@@ -227,12 +227,19 @@ func (config *BridgeConfig) configuredBridgeType() Bridge {
 }
 
 func EnsureBridge(procPath string, config *BridgeConfig, log *logrus.Logger) (Bridge, error) {
-	bridgeType, err := ExistingBridgeType(config.WeaveBridgeName, config.DatapathName)
+	existingBridgeType, err := ExistingBridgeType(config.WeaveBridgeName, config.DatapathName)
-	if bridgeType != nil || err != nil {
+	if err != nil {
-		return bridgeType, err
+		return nil, err
+	}
+
+	bridgeType := config.configuredBridgeType()
+
+	if existingBridgeType != nil && bridgeType.String() != existingBridgeType.String() {
+		return nil,
+			fmt.Errorf("Existing bridge type %q is different than requested %q. Please do 'weave reset' and try again",
+				existingBridgeType, bridgeType)
 	}
 
-	bridgeType = config.configuredBridgeType()
 	for {
 		if err := bridgeType.init(config); err != nil {
 			if errors.Cause(err) == errBridgeNotSupported {
@@ -288,7 +295,7 @@ func (b bridgeImpl) initPrep(config *BridgeConfig) error {
 		config.MTU = 65535
 	}
 	b.bridge = &netlink.Bridge{LinkAttrs: linkAttrs}
-	if err = netlink.LinkAdd(b.bridge); err != nil {
+	if err := LinkAddIfNotExist(b.bridge); err != nil {
 		return errors.Wrapf(err, "creating bridge %q", config.WeaveBridgeName)
 	}
 	if err := netlink.LinkSetHardwareAddr(b.bridge, mac); err != nil {
@@ -320,7 +327,7 @@ func (b bridgeImpl) init(config *BridgeConfig) error {
 	if err := b.initPrep(config); err != nil {
 		return err
 	}
-	if _, err := CreateAndAttachVeth(BridgeIfName, PcapIfName, config.WeaveBridgeName, config.MTU, true, func(veth netlink.Link) error {
+	if _, err := CreateAndAttachVeth(BridgeIfName, PcapIfName, config.WeaveBridgeName, config.MTU, true, false, func(veth netlink.Link) error {
 		return netlink.LinkSetUp(veth)
 	}); err != nil {
 		return errors.Wrap(err, "creating pcap veth pair")
@@ -370,11 +377,11 @@ func (bf bridgedFastdpImpl) init(config *BridgeConfig) error {
 	if err := bf.bridgeImpl.initPrep(config); err != nil {
 		return err
 	}
-	if _, err := CreateAndAttachVeth(BridgeIfName, DatapathIfName, config.WeaveBridgeName, config.MTU, true, func(veth netlink.Link) error {
+	if _, err := CreateAndAttachVeth(BridgeIfName, DatapathIfName, config.WeaveBridgeName, config.MTU, true, false, func(veth netlink.Link) error {
 		if err := netlink.LinkSetUp(veth); err != nil {
 			return errors.Wrapf(err, "setting link up on %q", veth.Attrs().Name)
 		}
-		if err := odp.AddDatapathInterface(bf.datapathName, veth.Attrs().Name); err != nil {
+		if err := odp.AddDatapathInterfaceIfNotExist(bf.datapathName, veth.Attrs().Name); err != nil {
 			return errors.Wrapf(err, "adding interface %q to datapath %q", veth.Attrs().Name, bf.datapathName)
 		}
 		return nil
@@ -394,7 +401,7 @@ func (bf bridgedFastdpImpl) attach(veth *netlink.Veth) error {
 }
 
 func (f fastdpImpl) attach(veth *netlink.Veth) error {
-	return odp.AddDatapathInterface(f.datapathName, veth.Attrs().Name)
+	return odp.AddDatapathInterfaceIfNotExist(f.datapathName, veth.Attrs().Name)
 }
 
 func configureIPTables(config *BridgeConfig) error {
@@ -402,12 +409,13 @@ func configureIPTables(config *BridgeConfig) error {
 	if err != nil {
 		return errors.Wrap(err, "creating iptables object")
 	}
+
+	// The order among weave filter/FORWARD rules is important!
+	fwdRules := make([][]string, 0)
+
 	if config.DockerBridgeName != "" {
 		if config.WeaveBridgeName != config.DockerBridgeName {
-			err := ipt.Insert("filter", "FORWARD", 1, "-i", config.DockerBridgeName, "-o", config.WeaveBridgeName, "-j", "DROP")
+			fwdRules = append(fwdRules, []string{"-i", config.DockerBridgeName, "-o", config.WeaveBridgeName, "-j", "DROP"})
-			if err != nil {
-				return err
-			}
 		}
 
 		dockerBridgeIP, err := FindBridgeIP(config.DockerBridgeName, nil)
@@ -438,45 +446,42 @@ func configureIPTables(config *BridgeConfig) error {
 	if config.NPC {
 		// Steer traffic via the NPC
 		_ = ipt.NewChain("filter", "WEAVE-NPC") // ignore error because it might already exist
-		// If WEAVE-NPC chain doesn't exist then next line will fail
+		// If WEAVE-NPC chain doesn't exist then creating a rule in the chain will fail
-		if err = ipt.AppendUnique("filter", "FORWARD", "-o", config.WeaveBridgeName, "-j", "WEAVE-NPC"); err != nil {
+		fwdRules = append(fwdRules,
-			return err
+			[][]string{
-		}
+				{"-o", config.WeaveBridgeName,
-		if err = ipt.AppendUnique("filter", "FORWARD", "-o", config.WeaveBridgeName, "-m", "state", "--state", "NEW", "-j", "NFLOG", "--nflog-group", "86"); err != nil {
+					"-m", "comment", "--comment", "NOTE: this must go before '-j KUBE-FORWARD'",
-			return err
+					"-j", "WEAVE-NPC"},
-		}
+				{"-o", config.WeaveBridgeName, "-m", "state", "--state", "NEW", "-j", "NFLOG", "--nflog-group", "86"},
-		if err = ipt.AppendUnique("filter", "FORWARD", "-o", config.WeaveBridgeName, "-j", "DROP"); err != nil {
+				{"-o", config.WeaveBridgeName, "-j", "DROP"},
-			return err
+			}...)
-		}
 	} else {
 		// Work around the situation where there are no rules allowing traffic
 		// across our bridge. E.g. ufw
-		if err = ipt.AppendUnique("filter", "FORWARD", "-i", config.WeaveBridgeName, "-o", config.WeaveBridgeName, "-j", "ACCEPT"); err != nil {
+		fwdRules = append(fwdRules, []string{"-i", config.WeaveBridgeName, "-o", config.WeaveBridgeName, "-j", "ACCEPT"})
-			return err
-		}
 	}
 
 	if !config.NPC {
 		// Create a chain for allowing ingress traffic when the bridge is exposed
 		_ = ipt.NewChain("filter", "WEAVE-EXPOSE")
-		if err = ipt.AppendUnique("filter", "FORWARD", "-o", config.WeaveBridgeName, "-j", "WEAVE-EXPOSE"); err != nil {
+		fwdRules = append(fwdRules, []string{"-o", config.WeaveBridgeName, "-j", "WEAVE-EXPOSE"})
-			return err
-		}
 	}
 
 	// Forward from weave to the rest of the world
-	if err = ipt.AppendUnique("filter", "FORWARD", "-i", config.WeaveBridgeName, "!", "-o", config.WeaveBridgeName, "-j", "ACCEPT"); err != nil {
+	fwdRules = append(fwdRules, []string{"-i", config.WeaveBridgeName, "!", "-o", config.WeaveBridgeName, "-j", "ACCEPT"})
-		return err
-	}
 	// and allow replies back
-	if err = ipt.AppendUnique("filter", "FORWARD", "-o", config.WeaveBridgeName, "-m", "conntrack", "--ctstate", "RELATED,ESTABLISHED", "-j", "ACCEPT"); err != nil {
+	fwdRules = append(fwdRules, []string{"-o", config.WeaveBridgeName, "-m", "conntrack", "--ctstate", "RELATED,ESTABLISHED", "-j", "ACCEPT"})
+
+	if err := ensureRulesAtTop("filter", "FORWARD", fwdRules, ipt); err != nil {
 		return err
 	}
 
 	// create a chain for masquerading
-	if err = ipt.ClearChain("nat", "WEAVE"); err != nil {
+	//
-		return errors.Wrap(err, "clearing WEAVE chain")
+	// NB: we do not clear the chain to preserve existing rules
-	}
+	// inserted by "weave expose".
+	_ = ipt.NewChain("nat", "WEAVE")
+
 	return ipt.AppendUnique("nat", "POSTROUTING", "-j", "WEAVE")
 }
 
@@ -487,3 +492,40 @@ func linkSetUpByName(linkName string) error {
 	}
 	return netlink.LinkSetUp(link)
 }
+
+// ensureRulesAtTop ensures the presence of given iptables rules.
+//
+// If any rule from the list is missing, the function deletes all given
+// rules and re-inserts them at the top of the chain to ensure the order of the rules.
+func ensureRulesAtTop(table, chain string, rulespecs [][]string, ipt *iptables.IPTables) error {
+	allFound := true
+
+	for _, rs := range rulespecs {
+		found, err := ipt.Exists(table, chain, rs...)
+		if err != nil {
+			return errors.Wrapf(err, "ipt.Exists(%s, %s, %s)", table, chain, rs)
+		}
+		if !found {
+			allFound = false
+			break
+		}
+	}
+
+	// All rules exist, do nothing.
+	if allFound {
+		return nil
+	}
+
+	for pos, rs := range rulespecs {
+		// If any is missing, then delete all, as we need to preserve the order of
+		// given rules. Ignore errors, as rule might not exist.
+		if !allFound {
+			ipt.Delete(table, chain, rs...)
+		}
+		if err := ipt.Insert(table, chain, pos+1, rs...); err != nil {
+			return errors.Wrapf(err, "ipt.Append(%s, %s, %s)", table, chain, rs)
+		}
+	}
+
+	return nil
+}

net/netlink.go

@@ -0,0 +1,16 @@
+package net
+
+import (
+	"syscall"
+
+	"github.com/pkg/errors"
+	"github.com/vishvananda/netlink"
+)
+
+func LinkAddIfNotExist(link netlink.Link) error {
+	err := netlink.LinkAdd(link)
+	if err != nil && err == syscall.EEXIST {
+		return nil
+	}
+	return errors.Wrapf(err, "creating link %q", link)
+}

net/veth.go

@@ -13,7 +13,7 @@ import (
 )
 
 // create and attach a veth to the Weave bridge
-func CreateAndAttachVeth(name, peerName, bridgeName string, mtu int, keepTXOn bool, init func(peer netlink.Link) error) (*netlink.Veth, error) {
+func CreateAndAttachVeth(name, peerName, bridgeName string, mtu int, keepTXOn bool, errIfLinkExist bool, init func(peer netlink.Link) error) (*netlink.Veth, error) {
 	bridge, err := netlink.LinkByName(bridgeName)
 	if err != nil {
 		return nil, fmt.Errorf(`bridge "%s" not present; did you launch weave?`, bridgeName)
@@ -28,7 +28,12 @@ func CreateAndAttachVeth(name, peerName, bridgeName string, mtu int, keepTXOn bo
 			MTU:  mtu},
 		PeerName: peerName,
 	}
-	if err := netlink.LinkAdd(veth); err != nil {
+
+	linkAdd := LinkAddIfNotExist
+	if errIfLinkExist {
+		linkAdd = netlink.LinkAdd
+	}
+	if err := linkAdd(veth); err != nil {
 		return nil, fmt.Errorf(`could not create veth pair %s-%s: %s`, name, peerName, err)
 	}
 
@@ -116,7 +121,7 @@ func AttachContainer(netNSPath, id, ifName, bridgeName string, mtu int, withMult
 			id = id[:maxIDLen] // trim passed ID if too long
 		}
 		name, peerName := vethPrefix+"pl"+id, vethPrefix+"pg"+id
-		veth, err := CreateAndAttachVeth(name, peerName, bridgeName, mtu, keepTXOn, func(veth netlink.Link) error {
+		veth, err := CreateAndAttachVeth(name, peerName, bridgeName, mtu, keepTXOn, true, func(veth netlink.Link) error {
 			if err := netlink.LinkSetNsFd(veth, int(ns)); err != nil {
 				return fmt.Errorf("failed to move veth to container netns: %s", err)
 			}

npc/json.go

@@ -4,7 +4,56 @@ import (
 	"encoding/json"
 )
 
+// Return JSON suitable for logging an API object.
 func js(v interface{}) string {
+	// Get the raw JSON
 	a, _ := json.Marshal(v)
+	// Convert this back into a tree of key-value maps
+	var m map[string]interface{}
+	if err := json.Unmarshal(a, &m); err != nil {
+		// If that didn't work, just return the raw version
+		return string(a)
+	}
+	// Trim some bulk, and potentially sensitive areas
+	withMap(m["metadata"], func(status map[string]interface{}) {
+		delete(status, "ownerReferences")
+	})
+	withMap(m["spec"], func(spec map[string]interface{}) {
+		delete(spec, "tolerations")
+		delete(spec, "volumes")
+		rangeSlice(spec["containers"], func(container map[string]interface{}) {
+			delete(container, "args")
+			delete(container, "command")
+			delete(container, "env")
+			delete(container, "livenessProbe")
+			delete(container, "resources")
+			delete(container, "securityContext")
+			delete(container, "volumeMounts")
+		})
+	})
+	withMap(m["status"], func(status map[string]interface{}) {
+		delete(status, "containerStatuses")
+	})
+	// Now marshall what's left to JSON
+	a, _ = json.Marshal(m)
 	return string(a)
 }
+
+// Helper function: operate on a map node from a tree of key-value maps
+func withMap(m interface{}, f func(map[string]interface{})) {
+	if v, ok := m.(map[string]interface{}); ok {
+		f(v)
+	}
+}
+
+// Helper function: operate on all nodes under i which is a slice in a
+// tree of key-value maps
+func rangeSlice(i interface{}, f func(map[string]interface{})) {
+	if s, ok := i.([]interface{}); ok {
+		for _, v := range s {
+			if m, ok := v.(map[string]interface{}); ok {
+				f(m)
+			}
+		}
+	}
+}

plugin/net/driver.go

@@ -134,7 +134,7 @@ func (driver *driver) CreateEndpoint(create *api.CreateEndpointRequest) (*api.Cr
 
 	// create veths. note we assume endpoint IDs are unique in the first 9 chars
 	name, peerName := vethPair(create.EndpointID)
-	if _, err := weavenet.CreateAndAttachVeth(name, peerName, weavenet.WeaveBridgeName, 0, false, nil); err != nil {
+	if _, err := weavenet.CreateAndAttachVeth(name, peerName, weavenet.WeaveBridgeName, 0, false, true, nil); err != nil {
 		return nil, driver.error("JoinEndpoint", "%s", err)
 	}
 

prog/kube-peers/annotations.go

@@ -73,8 +73,10 @@ const (
 	retryPeriod  = time.Second * 2
 	jitterFactor = 1.0
 
+	// Prefix all our annotation keys with this string so they don't clash with anyone else's
+	KubePeersPrefix = "kube-peers.weave.works/"
 	// KubePeersAnnotationKey is the default annotation key
-	KubePeersAnnotationKey = "kube-peers.weave.works/peers"
+	KubePeersAnnotationKey = KubePeersPrefix + "peers"
 )
 
 func (cml *configMapAnnotations) Init() error {
@@ -130,46 +132,59 @@ func (cml *configMapAnnotations) UpdatePeerList(list peerList) error {
 	return cml.UpdateAnnotation(KubePeersAnnotationKey, string(recordBytes))
 }
 
-func (cml *configMapAnnotations) UpdateAnnotation(key, value string) error {
+// Clean up a string so it meets the Kubernetes requiremements for Annotation keys:
+// name part must consist of alphanumeric characters, '-', '_' or '.', and must
+// start and end with an alphanumeric character (e.g. 'MyName', or 'my.name', or '123-abc')
+func cleanKey(key string) string {
+	buf := []byte(key)
+	for i, c := range buf {
+		if (c >= 'A' && c <= 'Z') || (c >= 'a' && c <= 'z') || (c >= '0' && c <= '9') || c == '-' || c == '_' || c == '.' || c == '/' {
+			continue
+		}
+		buf[i] = '_'
+	}
+	return string(buf)
+}
+
+func (cml *configMapAnnotations) GetAnnotation(key string) (string, bool) {
+	value, ok := cml.cm.Annotations[cleanKey(key)]
+	return value, ok
+}
+
+func (cml *configMapAnnotations) UpdateAnnotation(key, value string) (err error) {
 	if cml.cm == nil {
 		return errors.New("endpoint not initialized, call Init first")
 	}
-	cm := cml.cm
+	// speculatively change the state, then replace with whatever comes back
-	cm.Annotations[key] = value
+	// from Update(), which will be the latest on the server whatever happened
-	cm, err := cml.Client.ConfigMaps(cml.Namespace).Update(cml.cm)
+	cml.cm.Annotations[cleanKey(key)] = value
-	if err == nil {
+	cml.cm, err = cml.Client.ConfigMaps(cml.Namespace).Update(cml.cm)
-		cml.cm = cm
-	}
 	return err
 }
 
-func (cml *configMapAnnotations) RemoveAnnotation(key string) error {
+func (cml *configMapAnnotations) RemoveAnnotation(key string) (err error) {
 	if cml.cm == nil {
 		return errors.New("endpoint not initialized, call Init first")
 	}
-	cm := cml.cm
+	// speculatively change the state, then replace with whatever comes back
-	delete(cm.Annotations, key)
+	// from Update(), which will be the latest on the server whatever happened
-	cm, err := cml.Client.ConfigMaps(cml.Namespace).Update(cml.cm)
+	delete(cml.cm.Annotations, cleanKey(key))
-	if err == nil {
+	cml.cm, err = cml.Client.ConfigMaps(cml.Namespace).Update(cml.cm)
-		cml.cm = cm
-	}
 	return err
 }
 
-func (cml *configMapAnnotations) RemoveAnnotationsWithValue(valueToRemove string) error {
+func (cml *configMapAnnotations) RemoveAnnotationsWithValue(valueToRemove string) (err error) {
 	if cml.cm == nil {
 		return errors.New("endpoint not initialized, call Init first")
 	}
-	cm := cml.cm
+	// speculatively change the state, then replace with whatever comes back
-	for key, value := range cm.Annotations {
+	// from Update(), which will be the latest on the server whatever happened
+	for key, value := range cml.cm.Annotations {
 		if value == valueToRemove {
-			delete(cm.Annotations, key)
+			delete(cml.cm.Annotations, key) // don't need to clean this key as it came from the map
 		}
 	}
-	cm, err := cml.Client.ConfigMaps(cml.Namespace).Update(cml.cm)
+	cml.cm, err = cml.Client.ConfigMaps(cml.Namespace).Update(cml.cm)
-	if err == nil {
-		cml.cm = cm
-	}
 	return err
 }
 

prog/kube-peers/main.go

@@ -98,6 +98,9 @@ func checkIamInPeerList(cml *configMapAnnotations, c *kubernetes.Clientset, peer
 // Kubernetes, remove it from Weave IPAM
 func reclaimRemovedPeers(weave *weaveapi.Client, cml *configMapAnnotations, nodes []nodeInfo, myPeerName string) error {
 	for {
+		if err := cml.Init(); err != nil {
+			return err
+		}
 		// 1. Compare peers stored in the peerList against all peers reported by k8s now.
 		storedPeerList, err := cml.GetPeerList()
 		if err != nil {
@@ -119,7 +122,7 @@ func reclaimRemovedPeers(weave *weaveapi.Client, cml *configMapAnnotations, node
 			common.Log.Debugln("[kube-peers] Preparing to remove disappeared peer", peer)
 			okToRemove := false
 			// 3. Check if there is an existing annotation with key X
-			if existingAnnotation, found := cml.cm.Annotations[peer.PeerName]; found {
+			if existingAnnotation, found := cml.GetAnnotation(KubePeersPrefix + peer.PeerName); found {
 				common.Log.Debugln("[kube-peers] Existing annotation", existingAnnotation)
 				// 4.   If annotation already contains my identity, ok;
 				if existingAnnotation == myPeerName {
@@ -128,14 +131,16 @@ func reclaimRemovedPeers(weave *weaveapi.Client, cml *configMapAnnotations, node
 			} else {
 				// 5.   If non-existent, write an annotation with key X and contents "my identity"
 				common.Log.Debugln("[kube-peers] Noting I plan to remove ", peer.PeerName)
-				if err := cml.UpdateAnnotation(peer.PeerName, myPeerName); err == nil {
+				if err := cml.UpdateAnnotation(KubePeersPrefix+peer.PeerName, myPeerName); err == nil {
 					okToRemove = true
+				} else {
+					common.Log.Debugln("[kube-peers] error from UpdateAnnotation: ", err)
 				}
 			}
 			if okToRemove {
 				// 6.   If step 4 or 5 succeeded, rmpeer X
 				result, err := weave.RmPeer(peer.PeerName)
-				common.Log.Infoln("[kube-peers] rmpeer of", peer.PeerName, ":", result)
+				common.Log.Infof("[kube-peers] rmpeer of %s: %s", peer.PeerName, result)
 				if err != nil {
 					return err
 				}
@@ -146,15 +151,12 @@ func reclaimRemovedPeers(weave *weaveapi.Client, cml *configMapAnnotations, node
 					}
 					// 7a.    Remove X from peerList
 					storedPeerList.remove(peer.PeerName)
-					common.Log.Infoln("[kube-peers] Removing peer ", peer.PeerName, ". Expecting to remove linked annotation next.")
 					if err := cml.UpdatePeerList(*storedPeerList); err != nil {
 						return err
 					}
-					common.Log.Infoln("[kube-peers] Removing annotation ", peer.PeerName)
 					// 7b.    Remove annotation with key X
-					return cml.RemoveAnnotation(peer.PeerName)
+					return cml.RemoveAnnotation(KubePeersPrefix + peer.PeerName)
 				})
-				common.Log.Debugln("[kube-peers] Finished removal of ", peer.PeerName)
 			}
 			// 8.   If step 5 failed due to optimistic lock conflict, stop: someone else is handling X
 

prog/net-plugin/config.json

@@ -50,6 +50,14 @@
     }
   ],
   "env": [
+    {
+      "description": "Log level",
+      "name": "LOG_LEVEL",
+      "settable": [
+          "value"
+      ],
+      "value": ""
+    },
     {
       "description": "Extra args to `weaver` and `plugin`",
       "name": "EXTRA_ARGS",

prog/net-plugin/launch.sh

@@ -7,6 +7,7 @@ IPALLOC_RANGE=${IPALLOC_RANGE:-10.32.0.0/12}
 HTTP_ADDR=${WEAVE_HTTP_ADDR:-127.0.0.1:6784}
 STATUS_ADDR=${WEAVE_STATUS_ADDR:-0.0.0.0:6782}
 HOST_ROOT=${HOST_ROOT:-/host}
+LOG_LEVEL=${LOG_LEVEL:-info}
 WEAVE_DIR="/host/var/lib/weave"
 
 mkdir $WEAVE_DIR || true
@@ -44,7 +45,7 @@ exec /home/weave/weaver $EXTRA_ARGS --port=6783 $(router_bridge_opts) \
     --no-dns \
     --ipalloc-range=$IPALLOC_RANGE \
     --nickname "$(hostname)" \
-    --log-level=debug \
+    --log-level=$LOG_LEVEL \
     --db-prefix="$WEAVE_DIR/weave" \
     --plugin-v2 \
     $(multicast_opt) \

prog/weaver/main.go

@@ -45,12 +45,20 @@ type ipamConfig struct {
 }
 
 type dnsConfig struct {
-	Domain                 string
+	Domain        string
-	ListenAddress          string
+	ListenAddress string
-	TTL                    int
+	TTL           int
-	ClientTimeout          time.Duration
+	ClientTimeout time.Duration
-	EffectiveListenAddress string
+	ResolvConf    string
-	ResolvConf             string
+}
+
+// return the address part of the DNS listen address, without ":53" on the end
+func (c dnsConfig) addressOnly() string {
+	addr, _, err := net.SplitHostPort(c.ListenAddress)
+	if err != nil {
+		Log.Fatalf("Error when parsing DNS listen address %q: %s", c.ListenAddress, err)
+	}
+	return addr
 }
 
 func (c *ipamConfig) Enabled() bool {
@@ -193,10 +201,10 @@ func main() {
 	mflag.StringVar(&dnsConfig.ListenAddress, []string{"-dns-listen-address"}, nameserver.DefaultListenAddress, "address to listen on for DNS requests")
 	mflag.IntVar(&dnsConfig.TTL, []string{"-dns-ttl"}, nameserver.DefaultTTL, "TTL for DNS request from our domain")
 	mflag.DurationVar(&dnsConfig.ClientTimeout, []string{"-dns-fallback-timeout"}, nameserver.DefaultClientTimeout, "timeout for fallback DNS requests")
-	mflag.StringVar(&dnsConfig.EffectiveListenAddress, []string{"-dns-effective-listen-address"}, "", "address DNS will actually be listening, after Docker port mapping")
 	mflag.StringVar(&dnsConfig.ResolvConf, []string{"-resolv-conf"}, "", "path to resolver configuration for fallback DNS lookups")
 	mflag.StringVar(&bridgeConfig.DatapathName, []string{"-datapath"}, "", "ODP datapath name")
 	mflag.BoolVar(&bridgeConfig.NoFastdp, []string{"-no-fastdp"}, false, "Disable Fast Datapath")
+	mflag.BoolVar(&bridgeConfig.NoBridgedFastdp, []string{"-no-bridged-fastdp"}, false, "Disable Bridged Fast Datapath")
 	mflag.StringVar(&trustedSubnetStr, []string{"-trusted-subnets"}, "", "comma-separated list of trusted subnets in CIDR notation")
 	mflag.StringVar(&dbPrefix, []string{"-db-prefix"}, "/weavedb/weave", "pathname/prefix of filename to store data")
 	mflag.StringVar(&procPath, []string{"-proc-path"}, "/proc", "path to reach host /proc filesystem")
@@ -263,6 +271,8 @@ func main() {
 	var proxy *weaveproxy.Proxy
 	var err error
 	if proxyConfig.Enabled {
+		proxyConfig.DNSListenAddress = dnsConfig.addressOnly()
+		proxyConfig.DNSDomain = dnsConfig.Domain
 		if noDNS {
 			proxyConfig.WithoutDNS = true
 		}
@@ -635,17 +645,13 @@ func createDNSServer(config dnsConfig, router *mesh.Router, isKnownPeer func(mes
 	gossip, err := router.NewGossip("nameserver", ns)
 	checkFatal(err)
 	ns.SetGossip(gossip)
-	upstream := nameserver.NewUpstream(config.ResolvConf, config.EffectiveListenAddress)
+	upstream := nameserver.NewUpstream(config.ResolvConf, config.addressOnly())
 	dnsserver, err := nameserver.NewDNSServer(ns, config.Domain, config.ListenAddress,
 		upstream, uint32(config.TTL), config.ClientTimeout)
 	if err != nil {
 		Log.Fatal("Unable to start dns server: ", err)
 	}
-	listenAddr := config.ListenAddress
+	Log.Println("Listening for DNS queries on", config.ListenAddress)
-	if config.EffectiveListenAddress != "" {
-		listenAddr = config.EffectiveListenAddress
-	}
-	Log.Println("Listening for DNS queries on", listenAddr)
 	return ns, dnsserver
 }
 

prog/weaveutil/attach.go

@@ -4,7 +4,6 @@ import (
 	"fmt"
 	"net"
 	"os"
-	"strconv"
 	"strings"
 	"syscall"
 
@@ -15,8 +14,8 @@ import (
 )
 
 func attach(args []string) error {
-	if len(args) < 4 {
+	if len(args) < 3 {
-		cmdUsage("attach-container", "[--no-multicast-route] [--keep-tx-on] [--hairpin-mode=true|false] <container-id> <bridge-name> <mtu> <cidr>...")
+		cmdUsage("attach-container", "[--no-multicast-route] [--keep-tx-on] [--hairpin-mode=true|false] <container-id> <bridge-name> <cidr>...")
 	}
 
 	keepTXOn := false
@@ -52,16 +51,12 @@ func attach(args []string) error {
 	} else if nsHost.Equal(nsContainer) {
 		return fmt.Errorf("Container is running in the host network namespace, and therefore cannot be\nconnected to weave - perhaps the container was started with --net=host")
 	}
-	mtu, err := strconv.Atoi(args[2])
+	cidrs, err := parseCIDRs(args[2:])
-	if err != nil && args[3] != "" {
-		return fmt.Errorf("unable to parse mtu %q: %s", args[2], err)
-	}
-	cidrs, err := parseCIDRs(args[3:])
 	if err != nil {
 		return err
 	}
 
-	err = weavenet.AttachContainer(weavenet.NSPathByPid(pid), fmt.Sprint(pid), weavenet.VethName, args[1], mtu, withMulticastRoute, cidrs, keepTXOn, hairpinMode)
+	err = weavenet.AttachContainer(weavenet.NSPathByPid(pid), fmt.Sprint(pid), weavenet.VethName, args[1], 0, withMulticastRoute, cidrs, keepTXOn, hairpinMode)
 	// If we detected an error but the container has died, tell the user that instead.
 	if err != nil && !processExists(pid) {
 		err = fmt.Errorf("Container %s died", args[0])

prog/weaveutil/bridge.go

@@ -2,9 +2,7 @@ package main
 
 import (
 	"fmt"
-	"strconv"
 
-	"github.com/weaveworks/weave/common"
 	weavenet "github.com/weaveworks/weave/net"
 )
 
@@ -22,36 +20,3 @@ func detectBridgeType(args []string) error {
 	}
 	return nil
 }
-
-func createBridge(args []string) error {
-	if len(args) != 10 {
-		cmdUsage("create-bridge", "<docker-bridge-name> <weave-bridge-name> <datapath-name> <mtu> <port> <mac> <no-fastdp> <no-bridged-fastdp> <proc-path> <expect-npc>")
-	}
-
-	mtu, err := strconv.Atoi(args[3])
-	if err != nil && args[3] != "" {
-		return err
-	}
-	port, err := strconv.Atoi(args[4])
-	if err != nil {
-		return err
-	}
-	config := weavenet.BridgeConfig{
-		DockerBridgeName: args[0],
-		WeaveBridgeName:  args[1],
-		DatapathName:     args[2],
-		MTU:              mtu,
-		Port:             port,
-		Mac:              args[5],
-		NoFastdp:         args[6] != "",
-		NoBridgedFastdp:  args[7] != "",
-		NPC:              args[9] == "--expect-npc",
-	}
-	procPath := args[8]
-	bridgeType, err := weavenet.EnsureBridge(procPath, &config, common.Log)
-	if err != nil {
-		return err
-	}
-	fmt.Println(bridgeType.String())
-	return nil
-}

prog/weaveutil/main.go

@@ -17,7 +17,6 @@ func init() {
 		"help":                     help,
 		"netcheck":                 netcheck,
 		"docker-tls-args":          dockerTLSArgs,
-		"create-bridge":            createBridge,
 		"detect-bridge-type":       detectBridgeType,
 		"create-datapath":          createDatapath,
 		"delete-datapath":          deleteDatapath,

proxy/create_container_interceptor.go

@@ -68,11 +68,11 @@ func (i *createContainerInterceptor) InterceptRequest(r *http.Request) error {
 		if err != nil {
 			return err
 		}
-		if dnsDomain := i.proxy.getDNSDomain(); dnsDomain != "" {
+		if !i.proxy.WithoutDNS {
-			if err := i.setHostname(container, hostname, dnsDomain); err != nil {
+			if err := i.setHostname(container, hostname, i.proxy.DNSDomain); err != nil {
 				return err
 			}
-			if err := i.proxy.setWeaveDNS(hostConfig, hostname, dnsDomain); err != nil {
+			if err := i.proxy.setWeaveDNS(hostConfig, hostname, i.proxy.DNSDomain); err != nil {
 				return err
 			}
 		}

proxy/proxy.go

@@ -61,6 +61,8 @@ type Config struct {
 	NoRewriteHosts      bool
 	TLSConfig           TLSConfig
 	WithoutDNS          bool
+	DNSListenAddress    string
+	DNSDomain           string
 	NoMulticastRoute    bool
 	KeepTXOn            bool
 	DockerBridge        string
@@ -78,7 +80,6 @@ type Proxy struct {
 	Config
 	client                 *weavedocker.Client
 	weave                  *weaveapi.Client
-	dockerBridgeIP         string
 	hostnameMatchRegexp    *regexp.Regexp
 	weaveWaitVolume        string
 	weaveWaitNoopVolume    string
@@ -158,15 +159,6 @@ func NewProxy(c Config) (*Proxy, error) {
 
 	Log.Info(p.client.Info())
 
-	if !p.WithoutDNS {
-		ip, err := weavenet.FindBridgeIP(c.DockerBridge, nil)
-		if err != nil {
-			return nil, err
-		}
-		p.dockerBridgeIP = ip.String()
-		Log.Infof("Using docker bridge IP for DNS: %v", p.dockerBridgeIP)
-	}
-
 	p.hostnameMatchRegexp, err = regexp.Compile(c.HostnameMatch)
 	if err != nil {
 		err := fmt.Errorf("Incorrect hostname match '%s': %s", c.HostnameMatch, err.Error())
@@ -595,7 +587,7 @@ func (proxy *Proxy) setWeaveDNS(hostConfig jsonObject, hostname, dnsDomain strin
 	if err != nil {
 		return err
 	}
-	hostConfig["Dns"] = append(dns, proxy.dockerBridgeIP)
+	hostConfig["Dns"] = append(dns, proxy.DNSListenAddress)
 
 	dnsSearch, err := hostConfig.StringArray("DnsSearch")
 	if err != nil {
@@ -612,14 +604,6 @@ func (proxy *Proxy) setWeaveDNS(hostConfig jsonObject, hostname, dnsDomain strin
 	return nil
 }
 
-func (proxy *Proxy) getDNSDomain() string {
-	if proxy.WithoutDNS {
-		return ""
-	}
-	domain, _ := proxy.weave.DNSDomain()
-	return domain
-}
-
 func (proxy *Proxy) updateContainerNetworkSettings(container jsonObject) error {
 	containerID, err := container.String("Id")
 	if err != nil {

proxy/start_container_interceptor.go

@@ -50,8 +50,8 @@ func (i *startContainerInterceptor) InterceptRequest(r *http.Request) error {
 						return err
 					}
 				}
-				if dnsDomain := i.proxy.getDNSDomain(); dnsDomain != "" {
+				if !i.proxy.WithoutDNS {
-					if err := i.proxy.setWeaveDNS(hostConfig, container.Config.Hostname, dnsDomain); err != nil {
+					if err := i.proxy.setWeaveDNS(hostConfig, container.Config.Hostname, i.proxy.DNSDomain); err != nil {
 						return err
 					}
 				}

router/network_router.go

@@ -70,7 +70,7 @@ func NewNetworkRouter(config mesh.Config, networkConfig NetworkConfig, bridgeCon
 	router.Routes.OnChange(overlay.InvalidateRoutes)
 	router.Macs = NewMacCache(macMaxAge,
 		func(mac net.HardwareAddr, peer *mesh.Peer) {
-			log.Println("Expired MAC", mac, "at", peer)
+			log.Debugln("Expired MAC", mac, "at", peer)
 		})
 	router.Peers.OnGC(func(peer *mesh.Peer) { router.Macs.Delete(peer) })
 	return router, nil
@@ -92,7 +92,7 @@ func (router *NetworkRouter) handleCapturedPacket(key PacketKey) FlowOp {
 
 	switch newSrcMac, conflictPeer := router.Macs.Add(srcMac, router.Ourself.Peer); {
 	case newSrcMac:
-		log.Println("Discovered local MAC", srcMac)
+		log.Debugln("Discovered local MAC", srcMac)
 	case conflictPeer != nil:
 		// The MAC cache has an entry for the source MAC
 		// associated with another peer.  This probably means

site/kubernetes/kube-addon.md

@@ -11,7 +11,9 @@ The following topics are discussed:
  * [Upgrading the Daemon Sets](#daemon-sets)
  * [CPU and Memory Requirements](#resources)
  * [Pod Eviction](#eviction)
-* [Network Policy Controller](#npc)
+* [Features](#features)
+ * [Pod Network](#pod-network)
+ * [Network Policy](#npc)
 * [Troubleshooting](#troubleshooting)
  * [Troubleshooting Blocked Connections](#blocked-connections)
  * [Things to watch out for](#key-points)
@@ -147,16 +149,33 @@ mypod-09vkd         0/1       Evicted   0          1h        <none>      node-1
 If you see this in your cluster, consider some of the above steps to
 reduce disruption.
 
-## <a name="npc"></a>Network Policy Controller
+## <a name="features"></a>Features
 
-The addon also supports the [Kubernetes policy
+### <a name="pod-network"></a>Pod Network
-API](http://kubernetes.io/docs/user-guide/networkpolicies/) so that
+
-you can securely isolate pods from each other based on namespaces and
+Weave Net provides a network to connect all pods together,
+implementing the [Kubernetes
+model](https://kubernetes.io/docs/concepts/cluster-administration/networking/#kubernetes-model).
+
+Kubernetes uses the _Container Network Interface_
+([CNI](https://github.com/containernetworking/cni)) to join pods onto Weave Net.
+
+Kubernetes implements many network features itself on top of the pod
+network.  This includes
+[Services](https://kubernetes.io/docs/concepts/services-networking/service/),
+[Service Discovery via DNS](https://kubernetes.io/docs/concepts/services-networking/dns-pod-service/)
+and [Ingress into the cluster](https://kubernetes.io/docs/concepts/services-networking/ingress/).
+WeaveDNS is disabled when using the Kubernetes addon.
+
+### <a name="npc"></a>Network Policy
+
+[Kubernetes Network Policies](https://kubernetes.io/docs/concepts/services-networking/network-policies/) let
+you securely isolate pods from each other based on namespaces and
 labels. For more information on configuring network policies in
 Kubernetes see the
-[walkthrough](http://kubernetes.io/docs/getting-started-guides/network-policy/walkthrough/)
+[walkthrough](https://kubernetes.io/docs/tasks/administer-cluster/declare-network-policy/)
 and the [NetworkPolicy API object
-definition](http://kubernetes.io/docs/api-reference/extensions/v1beta1/definitions/#_v1beta1_networkpolicy).
+definition](https://v1-7.docs.kubernetes.io/docs/api-reference/v1.7/#networkpolicy-v1-networking)
 
 **Note:** as of version 1.9 of Weave Net, the Network Policy
   Controller allows all multicast traffic. Since a single multicast
@@ -167,6 +186,11 @@ definition](http://kubernetes.io/docs/api-reference/extensions/v1beta1/definitio
 
 ## <a name="troubleshooting"></a> Troubleshooting
 
+Many Kubernetes network issues occur at a higher level than Weave Net.
+The [Kubernetes Service Debugging Guide]
+(https://kubernetes.io/docs/tasks/debug-application-cluster/debug-service/)
+has a detailed step-by-step guide.
+
 The status of Weave Net can be checked by running its CLI commands. This can be done in various ways:
 
 1\. [Install the `weave` script](/site/installing-weave.md) and run:
@@ -299,11 +323,14 @@ You can customise the YAML you get from `cloud.weave.works` by passing some of W
   - `disable-npc`: boolean (`true|false`). Default: `false`.
   - `env.NAME=VALUE`: add environment variable `NAME` and set it to `VALUE`.
   - `seLinuxOptions.NAME=VALUE`: add SELinux option `NAME` and set it to `VALUE`, e.g. `seLinuxOptions.type=spc_t`
+  - `use-legacy-netpol`: use [legacy NetworkPolicy semantics](https://v1-6.docs.kubernetes.io/docs/api-reference/v1.6/#networkpolicy-v1beta1-extensions), boolean (`true|false`). Default: `true` for Kubernetes version <= 1.6, `false` for > 1.6.
 
 The list of variables you can set is:
 
 * `CHECKPOINT_DISABLE` - if set to 1, disable checking for new Weave Net
   versions (default is blank, i.e. check is enabled)
+* `CONN_LIMIT` - soft limit on the number of connections between
+  peers. Defaults to 30.
 * `HAIRPIN_MODE` - Weave Net defaults to enabling hairpin on the bridge side of
   the `veth` pair for containers attached. If you need to disable hairpin, e.g. your
   kernel is one of those that can panic if hairpin is enabled, then you can disable it

site/tasks/ipam/troubleshooting-ipam.md

@@ -50,7 +50,7 @@ peers and their reachability can be obtained with
 
 ```
 $ weave status ipam
-00:00:00:00:00:01(one)      349526 IPs (33.3% of total)
+00:00:00:00:00:01(one)      349526 IPs (33.3% of total) (2 active)
 00:00:00:00:00:02(two)      349525 IPs (33.3% of total)
 00:00:00:00:00:03(three)    349525 IPs (33.3% of total) - unreachable!
 ```
@@ -59,6 +59,8 @@ Columns are as follows:
 
 * Peer Name and Nickname
 * Absolute quantity/percentage of allocation range managed by peer
+* Active - number of IP addresses in use on that peer - this is only
+  available for the peer where you run the status command.
 * Indication of unreachability. This means that the peer is not
   visible (directly or indirectly) to the peer on which `weave status
   ipam` was run; whilst this could be a transient condition due to a

site/tasks/weavedns/weavedns.md

@@ -43,6 +43,10 @@ To disable an application container's use of weaveDNS, add the
 `--without-dns` option to `weave launch`. To
 disable weaveDNS itself, launch weave with the `--no-dns` option.
 
+> **Note** WeaveDNS is not part of the Weave Net Kubernetes add-on.
+    Kubernetes has its own DNS service, integrated with Kubernetes
+    Services, and WeaveDNS does not duplicate that functionality.
+
 **See Also**
 
  * [Integrating Docker via the API Proxy](/site/tasks/weave-docker-api/weave-docker-api.md)

test/191_create_bridge_2_test.sh

@@ -0,0 +1,59 @@
+#! /bin/bash
+
+. "$(dirname "$0")/config.sh"
+
+C1=10.32.0.2
+C2=10.32.0.3
+
+kill_weaver() {
+    run_on $HOST1 sudo ip link set weave down
+    WEAVER_PID=$(container_pid $HOST1 weave)
+    run_on $HOST1 sudo kill -9 $WEAVER_PID
+    sleep 3
+}
+
+start_suite "Re-create bridge after restart"
+
+# Should create a bridge of the "bridge" type.
+WEAVE_NO_FASTDP=1 weave_on $HOST1 launch
+WEAVE_NO_FASTDP=1 weave_on $HOST2 launch $HOST1
+
+start_container $HOST1 $C1/24 --name=c1
+start_container $HOST2 $C2/24 --name=c2
+assert_raises "exec_on $HOST1 c1 $PING $C2"
+
+kill_weaver # should re-create the bridge
+
+assert_raises "exec_on $HOST1 c1 $PING $C2"
+
+# Should create a bridge of the "bridged_fastdp" type
+weave_on $HOST1 reset
+weave_on $HOST1 launch $HOST2
+weave_on $HOST1 attach $C1/24 c1
+assert_raises "exec_on $HOST1 c1 $PING $C2"
+
+kill_weaver # should re-create the bridge
+
+assert_raises "exec_on $HOST1 c1 $PING $C2"
+
+# test restore of iptables
+
+weave_on $HOST1 reset
+# `--expect-npc` to trigger creation of WEAVE-NPC iptables chain.
+weave_on $HOST1 launch --expect-npc
+# To create POSTROUTING rules.
+weave_on $HOST1 expose
+
+IPT_BEFORE=$(mktemp)
+IPT_AFTER=$(mktemp)
+run_on $HOST1 "sudo iptables-save | grep -i weave | grep -v '\[.*:.*\]' > $IPT_BEFORE"
+
+run_on $HOST1 "sudo iptables -t filter -D FORWARD -o weave -m comment --comment \"NOTE: this must go before '-j KUBE-FORWARD'\" -j WEAVE-NPC"
+run_on $HOST1 sudo iptables -t nat -D POSTROUTING -j WEAVE
+kill_weaver # should re-create the bridge and iptables friends
+
+# Rudimentary check that weave related iptables rules has been restored
+run_on $HOST1 "sudo iptables-save | grep -i weave | grep -v '\[.*:.*\]' > $IPT_AFTER"
+assert_raises "run_on $HOST1 diff $IPT_BEFORE $IPT_AFTER"
+
+end_suite

test/195_no_multicast_route_1_test.sh

@@ -21,7 +21,7 @@ start_container_local_plugin $HOST1 --name=c3
 
 assert "show_multicast_route_on $HOST1 c1"
 assert "show_multicast_route_on $HOST1 c2"
-assert "show_multicast_route_on $HOST1 c3" "224.0.0.0/4 dev ethwe0 "
+assert "show_multicast_route_on $HOST1 c3" "224.0.0.0/4 dev ethwe0 scope link "
 
 # Now try via docker network options
 # using ssh rather than docker -H because CircleCI docker client is older
@@ -30,7 +30,7 @@ $SSH $HOST1 docker run --net=testmcastfalse --name c4 -di $SMALL_IMAGE /bin/sh
 assert "show_multicast_route_on $HOST1 c4"
 $SSH $HOST1 docker network create --driver weavemesh --ipam-driver weavemesh --opt works.weave.multicast testmcasttrue
 $SSH $HOST1 docker run --net=testmcasttrue --name c5 -di $SMALL_IMAGE /bin/sh
-assert "show_multicast_route_on $HOST1 c5" "224.0.0.0/4 dev ethwe0 "
+assert "show_multicast_route_on $HOST1 c5" "224.0.0.0/4 dev ethwe0 scope link "
 
 # Ensure current proxy options are obeyed on container start
 docker_on $HOST1 stop -t 1 c2
@@ -39,7 +39,7 @@ weave_on $HOST1 launch
 
 proxy docker_on $HOST1 start c2
 
-assert "show_multicast_route_on $HOST1 c2" "224.0.0.0/4 dev ethwe "
+assert "show_multicast_route_on $HOST1 c2" "224.0.0.0/4 dev ethwe scope link "
 
 docker_on $HOST1 rm -f c3 c4 c5
 $SSH $HOST1 docker network rm testmcasttrue testmcastfalse

test/840_weave_kube_3_test.sh

@@ -5,6 +5,10 @@
 tear_down_kubeadm() {
     for host in $HOSTS; do
         run_on $host "sudo kubeadm reset && sudo rm -r -f /opt/cni/bin/*weave*"
+        # Remove the rule to ensure that api-server is not accessible while kube-proxy
+        # is not ready. Otherwise, we have a race between "-j KUBE-FORWARD" and "-j WEAVE-NPC"
+        # which makes the NodePort isolation test case to fail.
+        run_on $host "sudo iptables -t nat -D PREROUTING -m comment --comment \"kubernetes service portals\" -j KUBE-SERVICES" || true
     done
 }
 
@@ -18,6 +22,7 @@ NUM_HOSTS=$(howmany $HOSTS)
 SUCCESS="$(( $NUM_HOSTS * ($NUM_HOSTS-1) )) established"
 KUBECTL="sudo kubectl --kubeconfig /etc/kubernetes/admin.conf"
 KUBE_PORT=6443
+WEAVE_NETWORK=10.32.0.0/12
 IMAGE=weaveworks/network-tester:latest
 DOMAIN=nettest.default.svc.cluster.local.
 
@@ -33,9 +38,9 @@ k8s_version_option="$([[ "$k8s_version" > "v1.6" ]] && echo "kubernetes-version"
 
 for host in $HOSTS; do
     if [ $host = $HOST1 ] ; then
-	run_on $host "sudo systemctl start kubelet && sudo kubeadm init --$k8s_version_option=$k8s_version --token=$TOKEN"
+	run_on $host "sudo systemctl start kubelet && sudo kubeadm init --$k8s_version_option=$k8s_version --token=$TOKEN --pod-network-cidr=$WEAVE_NETWORK"
     else
-	run_on $host "sudo systemctl start kubelet && sudo kubeadm join --token=$TOKEN $HOST1IP:$KUBE_PORT"
+	run_on $host "sudo systemctl start kubelet && sudo kubeadm join --token=$TOKEN --discovery-token-unsafe-skip-ca-verification $HOST1IP:$KUBE_PORT"
     fi
 done
 
@@ -134,6 +139,22 @@ spec:
     run: nettest
 EOF
 
+# And a NodePort service so we can test virtual IP access
+run_on $HOST1 "$KUBECTL create -f -" <<EOF
+apiVersion: v1
+kind: Service
+metadata:
+  name: netvirt
+spec:
+  type: NodePort
+  ports:
+  - port: 80
+    targetPort: 8080
+    nodePort: 31138
+  selector:
+    run: nettest
+EOF
+
 podName=$($SSH $HOST1 "$KUBECTL get pods -l run=nettest -o go-template='{{(index .items 0).metadata.name}}'")
 
 check_all_pods_communicate() {
@@ -170,6 +191,15 @@ assert_raises 'wait_for_x check_all_pods_communicate pods'
 # nettest-deny should still not be able to reach nettest pods
 assert_raises "! $SSH $HOST1 $KUBECTL exec $denyPodName -- curl -s -S -f -m 2 http://$DOMAIN:8080/status >/dev/null"
 
+# check access via virtual IP
+VIRTUAL_IP=$($SSH $HOST1 $KUBECTL get service netvirt -o template --template={{.spec.clusterIP}})
+assert_raises   "$SSH $HOST1 $KUBECTL exec     $podName -- curl -s -S -f -m 2 http://$VIRTUAL_IP/status >/dev/null"
+assert_raises "! $SSH $HOST1 $KUBECTL exec $denyPodName -- curl -s -S -f -m 2 http://$VIRTUAL_IP/status >/dev/null"
+
+# host should not be able to reach pods via service virtual IP or NodePort
+assert_raises "! $SSH $HOST1 curl -s -S -f -m 2 http://$VIRTUAL_IP/status >/dev/null"
+assert_raises "! $SSH $HOST1 curl -s -S -f -m 2 http://$HOST2:31138/status >/dev/null"
+
 # allow access for nettest-deny
 run_on $HOST1 "$KUBECTL apply -f -" <<EOF
 apiVersion: networking.k8s.io/v1
@@ -211,6 +241,10 @@ EOF
 
 assert_raises "$SSH $HOST1 $KUBECTL exec $denyPodName -- curl -s -S -f -m 2 http://$DOMAIN:8080/status >/dev/null"
 
+# Virtual IP and NodePort should now work
+assert_raises "$SSH $HOST1 curl -s -S -f -m 2 http://$VIRTUAL_IP/status >/dev/null"
+assert_raises "$SSH $HOST1 curl -s -S -f -m 2 http://$HOST2:31138/status >/dev/null"
+
 tear_down_kubeadm
 
 # Destroy our test ipset, and implicitly check it is still there

test/870_weave_recovers_unreachable_ips_on_relaunch_3_test.sh

@@ -44,7 +44,7 @@ function setup_kubernetes_cluster {
         if [ $host = $HOST1 ] ; then
         run_on $host "sudo systemctl start kubelet && sudo kubeadm init --$k8s_version_option=$k8s_version --token=$TOKEN"
         else
-        run_on $host "sudo systemctl start kubelet && sudo kubeadm join --token=$TOKEN $HOST1IP:$KUBE_PORT"
+        run_on $host "sudo systemctl start kubelet && sudo kubeadm join --token=$TOKEN --discovery-token-unsafe-skip-ca-verification $HOST1IP:$KUBE_PORT"
         fi
     done
 

test/README.md

@@ -13,7 +13,7 @@ it is recommended to run the tests from the build VM and not the host.
 
 > **NOTE WELL** The number of hosts required by a test must be specified in the test name. For example, `000_some_test.sh` will use one host, while `001_some_other_3_test.sh` will use three hosts. The number of hosts must be the last part of the test name before the `_test.sh` prefix. See `/tools/runner/runner.go` for details
 
-## Running tests
+## Running tests locally using VMs
 
 **TL;DR**: You can run the steps 2. to 7. below with one command: 
 
@@ -23,46 +23,62 @@ it is recommended to run the tests from the build VM and not the host.
 
   1. Start the build virtual machine (see above article for more details):
 
+        ```
         vagrant up
+        ```
 
   2. Start the three testing VMs:
 
+        ```
         cd test
         vagrant up
+        ```
 
   3. SSH into the build VM and go to Weave Net's sources:
 
+        ```
         cd ..
         vagrant ssh
         # you are now on the build VM:
         cd ~/weave 
+        ```
 
   4. Compile all code and dependencies:
 
+        ```
         make
         make testrunner
         cd test
+        ```
 
   5. Upload the weave images from where the `Makefile` puts them (`weave.tar.gz`) to 
      the three docker hosts, `docker load` these, and copies the `weave` script over:
 
+        ```
         ./setup.sh
+        ```
 
   6. Run individual tests, e.g.:
 
+        ```
         ./200_dns_test.sh
+        ```
 
      or run all tests (everything named `*_test.sh`):
 
+        ```
         ./run_all.sh
+        ```
 
   7. Stop all VMs:
 
+        ```
         exit
         # you are now on your host machine
         vagrant destroy -f
         cd test
         vagrant destroy -f
+        ```
 
 
 ## Using other VMs
@@ -92,3 +108,65 @@ When a new version of Docker is released, you willneed to update the GCE test im
 To do this, change the Docker version in `run-integration-tests.sh` and push the change.
 Next build in CircleCI will detect that there is no template for this version of Docker and will first create the template before running tests.
 Subsequent builds will then simply re-use the template.
+
+## Running the tests on a cloud provider
+
+Running the tests against a remote provider instead of local vagrant VMs is a little more involved, and reproduces the environment used for CI. It is recommended that you use the build VM to coordinate the build phase. Make sure you have a recent version of [ansible](https://github.com/ansible/ansible) installed, terraform will fail to provision the VMs.
+
+1. Create the build VM in the repository root and log in
+    
+    ```
+    # On your development machine
+    $ vagrant up
+    $ vagrant ssh
+    ```
+
+2. Once in the build vm, install the `gcloud` tools as [per the documentation](https://cloud.google.com/sdk/downloads). You need to do this manually as the circleCI VMs are already provisioned with `gcloud`.
+
+    ```
+    # On the build VM
+    $ curl https://sdk.cloud.google.com | bash
+    $ exec -l $SHELL
+    ```
+
+    You don't need to initialise the `gcloud` tools by running `gcloud init`.
+
+3. Export the secret key needed to decrypt the cloud credentials - This assumes you're using the build tools 
+
+    ```
+    # On the build VM
+    $ export SECRET_KEY="XXXXXXXXXX"
+    ```
+
+4. Navigate to the test directory and provision the VMs
+
+    ```
+    # On the build VM
+    $ cd weave/test
+    /weave/test$ ./run-integration-tests.sh up
+    ```
+5. Run the tests you need
+
+    ```
+    # On the build VM
+    /weave/test$ export TESTS="./090_docker_restart_policy_2_test.sh" 
+    /weave/test$ ./run-integration-tests.sh test
+    ```
+
+6. Don't forget to close down your remote VMs when you're done
+
+    ```
+    # On the build VM
+    /weave/test$ ./run-integration-tests.sh destroy
+    ```
+
+7. And switch off your build VM
+
+    ```
+    # On the build VM
+    /weave/test$ exit
+
+    # On your development machine
+    $ vagrant destroy -f 
+    # or "vagrant suspend" if you want to preserve the machine state
+    ```

test/Vagrantfile

@@ -25,7 +25,7 @@ Vagrant.configure(VAGRANTFILE_API_VERSION) do |config|
     config.vm.define hostname do |host|
       host.vm.provider :virtualbox do |vb|
         vb.name = hostname
-        vb.memory = 384
+        vb.memory = 2048
         configure_nat_dns(vb)
       end
 

weave

@@ -405,27 +405,6 @@ detect_bridge_type() {
     MTU=${WEAVE_MTU:-$(cat /sys/class/net/$BRIDGE/mtu)}
 }
 
-try_create_bridge() {
-    # Pass /dev/null because we do not have access to the weavedb files when this runs; BoltDB
-    # cannot open the file anyway if weaver is running, which is likely for attach|expose|hide.
-    MAC=$(util_op unique-id "/dev/null" "$HOST_ROOT")
-    BRIDGE_TYPE=$(util_op create-bridge "$DOCKER_BRIDGE" "$BRIDGE" "$DATAPATH" "$WEAVE_MTU" "$PORT" "$MAC" "$WEAVE_NO_FASTDP" "$WEAVE_NO_BRIDGED_FASTDP" "$PROC_PATH" "$1")
-    # Set some variables that are expected by code that comes later
-    [ "$BRIDGE_TYPE" != "fastdp" ] || DATAPATH="$BRIDGE"
-    MTU=${WEAVE_MTU:-$(cat /sys/class/net/$BRIDGE/mtu)}
-}
-
-create_bridge() {
-    validate_bridge_type
-    if ! try_create_bridge "$@" ; then
-        echo "Creating bridge '$BRIDGE' failed" >&2
-        # reset to original value so we destroy both kinds
-        DATAPATH=datapath
-        destroy_bridge
-        exit 1
-    fi
-}
-
 validate_bridge_type() {
     detect_bridge_type || return 0
 
@@ -557,6 +536,7 @@ router_bridge_opts() {
     echo --docker-bridge "$DOCKER_BRIDGE" --weave-bridge "$BRIDGE" --datapath "$DATAPATH"
     [ -z "$WEAVE_MTU" ] || echo --mtu "$WEAVE_MTU"
     [ -z $WEAVE_NO_FASTDP ] || echo --no-fastdp
+    [ -z $WEAVE_NO_BRIDGED_FASTDP ] || echo --no-bridged-fastdp
 }
 
 ######################################################################
@@ -918,9 +898,7 @@ check_overlap() {
 }
 
 detect_awsvpc() {
-    # Ignoring errors here: if we cannot detect AWSVPC we will skip the relevant
+    [ "$(call_weave GET /ipinfo/tracker 2>/dev/null)" != "awsvpc" ] || AWSVPC=1
-    # steps, because "attach" should work without the weave router running.
-    [ "$(call_weave GET /ipinfo/tracker)" != "awsvpc" ] || AWSVPC=1
 }
 
 # Call IPAM as necessary to lookup or allocate addresses
@@ -1256,7 +1234,6 @@ launch() {
         --host-root=/host \
         $(router_bridge_opts) \
         --ipalloc-range "$IPRANGE" \
-        --dns-effective-listen-address $DOCKER_BRIDGE_IP \
         --dns-listen-address $DOCKER_BRIDGE_IP:53 \
         --http-addr $HTTP_ADDR \
         --status-addr $STATUS_ADDR \
@@ -1436,7 +1413,6 @@ case "$COMMAND" in
         done
         [ $# -eq 1 ] || usage
         CONTAINER=$(util_op container-id $1)
-        create_bridge
         ipam_cidrs allocate $CONTAINER $CIDR_ARGS
         if [ -n "$REWRITE_HOSTS" ] ; then
             # rewrite /etc/hosts, unlinking the file (so Docker does
@@ -1444,7 +1420,7 @@ case "$COMMAND" in
             util_op rewrite-etc-hosts "$CONTAINER" "$EXEC_IMAGE" "$ALL_CIDRS" $DNS_EXTRA_HOSTS
         fi
         [ -n "$AWSVPC" ] && ATTACH_ARGS="--no-multicast-route --keep-tx-on"
-        util_op attach-container $ATTACH_ARGS $CONTAINER $BRIDGE $MTU $ALL_CIDRS >/dev/null
+        util_op attach-container $ATTACH_ARGS $CONTAINER $BRIDGE $ALL_CIDRS >/dev/null
         [ -n "$WITHOUT_DNS" ] || when_weave_running with_container_fqdn $CONTAINER put_dns_fqdn $ALL_CIDRS
         show_addrs $ALL_CIDRS
         ;;
@@ -1494,7 +1470,6 @@ case "$COMMAND" in
             [ $# -eq 2 -a "$1" = "-h" ] || usage
             FQDN="$2"
         fi
-        create_bridge
         expose_ip
         show_addrs $ALL_CIDRS
         ;;
@@ -1502,7 +1477,6 @@ case "$COMMAND" in
         collect_cidr_args "$@"
         shift $CIDR_ARG_COUNT
         ipam_cidrs lookup weave:expose $CIDR_ARGS
-        create_bridge
         for CIDR in $ALL_CIDRS ; do
             if ip addr show dev $BRIDGE | grep -qF $CIDR ; then
                 ip addr del dev $BRIDGE $CIDR